Joey's probably do update as they depend on the Hopper3 since there is even a Reset Joey files. Hopper+ is basically Android TV so it depends all what is included with your SmartTV. My LG 3D OLED SmartTV is from 2016 so it uses WebOS which means there is literally no apps for it since there is no App Store so if you have Android TV, then it's not needed but if you don't have it or have RokuTV or anything else, then it does add things. At least the sound is way louder on the Hopper+ than the Hopper 3.
Look on the main diagnostics screen. It will show a release date because even today when I downloaded and installed P14703 on the Hopper Plus which was within the last 15 minutes, it shows on the Hopper3 Diagnostics November 26, 2025 3:03AM, not the date it was installed. The Hopper3 software is always the date it is installed it seems.
Look to the column next to it, you are looking at the Hopper3 software version, there is a Hopper Plus software section to the right of it.
our joey did an update this morning while we were watching tv i let it go through. we don't have the hopper+ nor do we want it since it destroys the multi view
It should but in my case, I installed P14701 on 11/26/2025 until I manually updated yesterday to P14703 so the 11/26/2025 is not the installed date but seems to be the date of the installation of the previous version as I always post about new versions on the same day I manually update to it.
It should but in my case, I had P14701 until I manually updated yesterday so the 11/26/2025 is not the installed date.
Yes, there are always some bad parts about it. MultiView for me even without the Hopper+ is not stable as it can hang or cause the Hopper3 to reboot.
well we have not had problems with the multi view yet. i wonder what could be going on with it
That's because you don't have a Hopper+ and he does and that's what he is talking about.
