Stab Hh100,

[magnoan]

I bought a new STAB HH100, what should I setup me inclination on the dish and motor?

AMC-6 as a true south (KU) satellite

Latitude: 42.254 N
Longitude: 71.460 W

Thanks in advance

 

[turbosat]

I believe you set the motor elev same as your site elevation>check on the Sadoun site, he has a great page for setting up those Stab motors. Been thinking about ordering one for myself!

 

[qwert1515]

The STAB HH100 guide it here: STAB HH100 motor (English & Spanish)

It says that the motor elevation is the same as your latitude and the dish elevation is calculated by this formula:

Degrees of dish elevation = P - (60 - latitude)

P = degrees of dish elevation for fixed mount given by the
manufacturer.

 

[Sadoun]

For the HH100 motor, you can calculate the dish elevation angle here: http://www.sadoun.com/Sat/Installation/STAB-Installation-Angles.htm

 

[magnoan]

great ... thanks for the info,one other question where on the motor arm (HH100) to mount my dish ?Should it be mounted even with the bottom of the arm or in the middle of the arm or as far up the arm as I can go?

 

[Sadoun]

Here is a picture to help explain it: http://www.sadoun.com/Sat/Products/Fortec-Star/Dishes/U-Bolt-Motor.jpg