This is a mobile optimized page that loads fast, if you want to load the real page, click this text.

TechSAT TRACKER II

Status
Please reply by conversation.
You asked why you told the motor to go to 97 and instead were on 103, well the answer is==, until you find the correct one, your receiver does not know where the dish it is pointing. Once you find one and Identify one satellite, then you can get to any other. Some "trackers' will let you tell the receiver WHERE YOU ARE then you tell it where you want to be and it will go there, But most need you to get to true south to set the 'tracker' then it can find anything (or at least be so very close that you can re-tweak the dish so it will find everything.)
Hope That Helps.
POP
 
Very hot 95-101 F.

Still no luck with the signal.. I believe there is too many tree's but I can pick up 28-31% quality on AMC
 
Trees are no good, remember your dish is "looking" about 30deg up.
You're close, from behind the dish, a little to the left and up a bit.
Do you have your skew set, give it a twist see if anything improves.
Otherwise you may have to mount higher.
 
I heard with the 36 inch dish the signal is stronger with tree's or other objects blocking some of the views...
 
What I discovered at my house and my mother's that if I mouth the dish on a pole stand it doesn't get any signal and if I mount the dish on the ground I get about 31% quaility. Now with the 31% I think its AMC 1.

I think now I need to make a good ground stand. If I take some pictures would it help you guys help me with this issue?
 
Receiver shows Q 31%
Freq 11716 or 11715 and 22000 Porl. V
 
So my quesiton is that the last time I got a Q it was scanning and found Pen. ch and someone said it was on AMC 1
 
That is my I'm a bit confused... I did scan it with feq 11716...
 


I feel really stupid.... The whole time I was doing +28.1... for some reason I thought you meant to say anti clockwise but it should be clockwise.... Thats a huge problem there... I'm shaking my head now...... I'll be sure to post updates after work.
 
A BIG Thanks to everyone and Lak7 for helping me with the problem I corrected the problem and I'm now in contact with Galaxy 25. I get about 50% Quality and all the stations.
 
Lak7 said:
Keep tweaking, gently pull up / down, left / right and see if signal improves.
I know you can get better!
Click to expand...


I'm sure because at once I got 60% and my wife was keep slapping me to not touch it anymore because once I lost it all and got it back...

I'm going to tweak it a bit more before she comes home from work... hahaha
 
"........wife was keep slapping me to not touch it.........."

LOL

Before loosening the bolts, just put pressure up / down, left / right and see if it improves.
 
Last edited:
Status
Please reply by conversation.

Similar threads

M
Transformer for MOTECK V-BOX II
Replies
8
Views
1K
MissouriXSeal
M
I killed my Super Jack II and bought a new Actuator ?????
Replies
6
Views
1K
C-BAND Satellite Discussion
Long Hair
Corotor II dual on Ebay
Replies
32
Views
4K
C-BAND Satellite Discussion
primestar31
Elevation Actuator - New Actuator(s) Part II
Replies
37
Views
5K
C-BAND Satellite Discussion
Need2learn
N
Help with HTS Tracker System V, ER 17
Replies
0
Views
750
C-BAND Satellite Discussion
SiMeCaIs
Menu
Log in
Register