This trick worked!!!

  • WELCOME TO THE NEW SERVER!

    If you are seeing this you are on our new server WELCOME HOME!

    While the new server is online Scott is still working on the backend including the cachine. But the site is usable while the work is being completes!

    Thank you for your patience and again WELCOME HOME!

    CLICK THE X IN THE TOP RIGHT CORNER OF THE BOX TO DISMISS THIS MESSAGE
Status
Please reply by conversation.
I tried this on my "slow" HR24. Seemed faster at first, but this morning it is slow again. :(
 
I tried this on an HR34 and it switched me to Spanish... did it again, and back to English ??

HR34 guide still operates in fits and spurts.
 
I updated the first post with the correct combination, because it switched me to Spanish too.
 
I tried this on an HR34 and it switched me to Spanish... did it again, and back to English ??

HR34 guide still operates in fits and spurts.

You didn't have it on channel 1 long enough. Wait 30 seconds then try it. You should see "NVRAM cleared" on the lower left side of the screen.
 
You didn't have it on channel 1 long enough. Wait 30 seconds then try it. You should see "NVRAM cleared" on the lower left side of the screen.

I gave it a good 5 minutes this time.. and did (barely) see the NVRAM message (very hard to see against the graphics of CH 1)... can't make any comment yet as to whether my HR34 is snappier, or whether I'm any younger/thinner, or more likely to attract babes at the beach.. will give it a few days and see.
 
Make sure you leave it on channel one for a good 30 seconds before you do the button punch.
 
I tried this on an HR34 and it switched me to Spanish... did it again, and back to English ??

HR34 guide still operates in fits and spurts.

I think that is because the Yellow button changes languages, not because of the procedure we're doing.
 
It will change the language if you don't leave the dvr on channel one long enough.
 
Status
Please reply by conversation.

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Who Read This Thread (Total Members: 1)