Last month I was told I qualified to upgrade to a ViP 722 for $149 up front then I will get a $100 rebate after sending in the rebate form with the first copy of my bill reflecting the upgrade. This upgrade offer with an 18 month committment would be good till Jan. 31, 2008.
Today I bit. I called the CSR who sounded she was from central India. As long as I had no noise from around the house here, I hushed them all up, I was able to understand what she was saying.
I told her what I said up above about the $149 up front deal and she says no. It is $199. I said I was specifically told and mentioned the ViP 722 three times to be sure last month and was gauranteed the $149 up front price. She put me on hold for not more then 5 minutes and said she was told she could give me this deal but it was not available to everyone. Whatever. I got the deal for $149 less $100 rebate coming later. (Note for everyone, just keep pressing for this but be nice).
I also told the CSR that I had a problem with my multi-switch. I have a SW-64 operating 4 receivers. 2 HD and 2 SD tuners. One of the HD tuners is leased. A ViP 211. That will be replaced by the new ViP 722. One of the SD tuners is hooked to the multi-switch via the power inserter. Months ago it was determined that the power inserter is bad. That receiver cannot see the third satellite but after lots of changing what receivers were hooked to what output, a tech CSR determined I knew what I was doing and will send me a new power inserter. Since I had a SD receiver hooked to that output that could not see 61.5, it did not matter that I had a new power inserter. I was thinking now that I am adding a 2 tuner reciever to the house, it might.
I had the CSR transfer me to tech support about this issue so I would not have a problem with my new installation. Now it seems I am getting my multi-switch changed from a SW-64 to a Dish Pro 44. I also told both CSR's the ViP 722 will operate 2 TV's but in fact will run 3 TV's. TV 1 is HD. That is easy. TV's 2 and 3 will operate 2 sets (I know they are stuck on the same channel) but here I have a 15 year old kid who will operate it mainly and the other set is for when my 20 year old daughter comes home to visit. She is off to college now. So here I will just run co-ax with a splitter to their TV's. They are both SDTV's.
I have a ViP 211 in the bedroom that I own. That does not change.
The kids have SDTV's. One is run by a 301 and the other by an 811. After the installation and my getting the wireing together, I am taking the 301 and 811 off the account and will sell them on eBay. Those sets will share the TV2 output on the new ViP 722.
The installation is Thursday AM. Wish me luck.
Today I bit. I called the CSR who sounded she was from central India. As long as I had no noise from around the house here, I hushed them all up, I was able to understand what she was saying.
I told her what I said up above about the $149 up front deal and she says no. It is $199. I said I was specifically told and mentioned the ViP 722 three times to be sure last month and was gauranteed the $149 up front price. She put me on hold for not more then 5 minutes and said she was told she could give me this deal but it was not available to everyone. Whatever. I got the deal for $149 less $100 rebate coming later. (Note for everyone, just keep pressing for this but be nice).
I also told the CSR that I had a problem with my multi-switch. I have a SW-64 operating 4 receivers. 2 HD and 2 SD tuners. One of the HD tuners is leased. A ViP 211. That will be replaced by the new ViP 722. One of the SD tuners is hooked to the multi-switch via the power inserter. Months ago it was determined that the power inserter is bad. That receiver cannot see the third satellite but after lots of changing what receivers were hooked to what output, a tech CSR determined I knew what I was doing and will send me a new power inserter. Since I had a SD receiver hooked to that output that could not see 61.5, it did not matter that I had a new power inserter. I was thinking now that I am adding a 2 tuner reciever to the house, it might.
I had the CSR transfer me to tech support about this issue so I would not have a problem with my new installation. Now it seems I am getting my multi-switch changed from a SW-64 to a Dish Pro 44. I also told both CSR's the ViP 722 will operate 2 TV's but in fact will run 3 TV's. TV 1 is HD. That is easy. TV's 2 and 3 will operate 2 sets (I know they are stuck on the same channel) but here I have a 15 year old kid who will operate it mainly and the other set is for when my 20 year old daughter comes home to visit. She is off to college now. So here I will just run co-ax with a splitter to their TV's. They are both SDTV's.
I have a ViP 211 in the bedroom that I own. That does not change.
The kids have SDTV's. One is run by a 301 and the other by an 811. After the installation and my getting the wireing together, I am taking the 301 and 811 off the account and will sell them on eBay. Those sets will share the TV2 output on the new ViP 722.
The installation is Thursday AM. Wish me luck.
