Would this be a good ku/c-band setup

[wildboys]

-6-ft SAMI mesh prime focus dish
-C/Ku Corotor Feed
-.17 C-Band LNB
-.6 Ku-Band LNB
-Servo motor
-18-inch Superjack actuator
-80' ribbon cable with sensor wire
-ORB-7500 analog satellite receiver with VCRS capability
-Viewsat 2000 Platinum DVB receiver with power scan
-DiSEqC 2x1 switch
-High frequency signal splitter [2]
can i get good results with ku and c-band with this combination or will the ku side be weak within the system?

 

[drhydro]

you might find the KU side a little weak on that system, mesh dishs are not the dish of choice for KU.

 

[sksatellite]

6' mesh will be O.K. with newest sat for KU band but not all. You may has signal problem with far side of ku signal. Normally, a 6 footer I would just use for fixed dish.

 

[Mr Tony]

If you plan on subscribing to some programming, a 6 foot is the absolute minimum. If its for just FTA, then it should work (although a solid dish would work better)

I have a solid 6 foot dish fixed (well, I do ghetto move it) and it does work fine for most FTA. But just like people who have a 30" KU dish...most want a bigger dish

 

[updatelee]

im not a big fan of the viewsat's as they dont really have powerscan (blindscan).

coolsat 5000 are great ird's, not sure if there still is a deal on for members or not, but it was a great deal !

I love my fortec mercury II