Search results for query: *

should be under the protection plan, I have been able to fix the arm by using salf taping metal screws and drilling them through the the spots where the welds were.

301 is done wont take activation, if you have 1.2 or 1.4ea will not work at all. should have arranged a dish mover tech will check out if the system is ok.

with the churn these days there are a lot of LNB's arround, if dish has 50+% returned then that will amount to a large amount of money but it is not worth removing them because a tech going out will cost 3 times as much as the part. So they want as many back as they can but if it involves work...

The 1.4 dish will allow snow to acumulate, the old d500 wont. I Know that there are several bibs for the dish which are designed to protect the dish from snow. Over the years I have seen 1 or 2 in use and they do work.

Best way to get it pole mounted is to buy the pole (arround $13 Home depot) and a bag of cement ( $6) Then try to dig a hole if you cant dont expect the tech to. Give the pole and cement to the tech and show him where you would like to place it if it works great if not take his suggestions. If...

I think the factor will be how long until Dish screws Sprint and the trial goies south Aka tvo, cable vision, retailers, and the other companys Dish has tried to have agremennts with.

Check signal from 119 tp 21 should be 75+(in my part of the states I look for 80+) if so could be the LNB, if not that high allignment is most likly the issue.

swap leads to rec, no change reciever, if it changes connect or LNB

Problem is the box(maybe but 322 is reliable), separator (not likly but easey to check), Conector is not good but good enough to transmit lower frequency. Run ck switch (6-1-1 ck switch, test) both should be 1 of 3 and result in 2 green matrix if not swap 2 inputs from seperator run ck switch...

The auto hopper is going to create a problem, it the advertiser cannot get there ads to be seen this removes the motovation for them to advertise on tv, and the money that goies with it. which in turn removes the motovation for the networks to nagotiate with dish for anything. Most people...

You can bet on that. Remember tevo, voom, retailers, just to mention a few, Remember TV is a not a utility the comercials you watch pay for your programs no comercials the cost of TV will go through the roof. Though I do not know what the other devices were considered I have not found the H/J...

I would suggest that this be moved to Installer zone, actually I havent seen a pay decress in three years but gas has gone up and up so I guess that is just the same.

None of the settings for the new dish's are on the menu, you will need to look them up. the 1000.4 can be tricky to install I recomend have some with experence coe out and point this dish. Add call dish back, and play CSR roulett and I would bet you could get it done for free. Also contact...

you will find many thread about grounding in this sight, yes this should be grounded and that grounding in this case appears simple.run a ground line from the dish to the electric box. As for my self, I will not move a working dish, it doesnt make sense, I will not remove bolts from a roof...

Most installers do not expect a tip I sure don't, but it is nice. If you make the choice to tip or not, think about this though your bill has gone up over the last year, the pay scales for the installers has remained stagnenet and in most cases they are required to do more work for the same...

are you looking for HD or SD The 500 will work with the SD recievers using 119 and 110. The LNB will need to swaped out to a DPP+ twn then the install is not hard at all. Each 322 wll feed 2 tvs and they will lease up to 3 recievers.

iS IT A Ea arc or wa dish, the EA dish (1k4) is hard to peak so I might recomend continuing to use the 500 which is very easy to peak.

For new customers it can be free, for existing customers its going to be $100... I don't see cost as a factor especially when the cost to install them is going to drop dramatically. (And since your an installer I can see why you would be concerned as your pay will go down as well.) Though I...

As a sub contractor there is a reality of what to expect from a "dish mover". It is a great program new dish, new wire, set up as you want it may be new commitment or some fee. Now the but, if I did the job you could expect the following, I will ONLY install if all recievers are there...

Failure of the H/J is relitive to the expectations. Under the current conditions what Dish might expect from the H/J is current customers who have multi HD DVRs and current customers that have more than 2 HD tvs would be prospective users of the H/J system, In the state and counties I work in...

you need a DPP twin. Run Ck switch and you should be good to go.

Good possibility you could get the fee waved. Installing it your self would depend on what equipment is on the roof. Leg.-DP-DPP.

If the have a net loss of subs and they have greater revenue this can only mean that they are doing business at less cost which I see as unlikly or they have managed to have the current customer base spend more for Dish's product. I think that there is a limit to how much a customer will pay...

this is a system error, most likely hardware related, if the XXX are in the message it is reloading software, kinda like reloading windows on your computer, basicly new DVR is in your future.

Super dish was discontinued some years ago, the existing ones can be adapted to use the DPP Lnb for 119,118,110 which sound like what you have in that case you only need 1 wire per reciever, Dual recievers using diplexers to carry signal from Reciever to 2nd tv will not carry any cable signal or...