Social Feed

D
Last reply · posted in DISH Network Support Forum
I guess this all starts from my first call to Dish and asking them about the switch. At first the CSR doesn't know what I'm talking about and starts getting a bit defensive about it. I ask her to talk to her supervisor about it and she does and confirms that I'm right about new HD being put on 72.7 and immediately schedules an eastern arc move. Unfortunately, she also insists I must replace my 311 with a HD solo tuner. Personally, I did not want this because the 311 only powers 2 little crappy CRT TV's and I have no plans upgrade them. (Guess I do now) Since they offered the receiver for free, I took it as I don't care about re-upping my 2 year commitment since I don't have any other TV options anyway. (Cable sucks here and when we tried to switch to D*, they gave us a lot of trouble regarding our install demands) Anyway, call ends, appointment confirmed.

Fastforward to the install. Tech shows up promptly, installs my new HD receiver and I then ask him about eastern arc. He then says I don't need it because I already get all of my channels off of 110/119/61.5. He checks with his guys back at HQ just to make sure and they confirm. So I call dish, get a CSR and she contacts the tech's HQ. As I am doing this, the tech calls what sounded like a special tech support line for installers. At first they say the same thing HQ told him before but they double check to make sure.

I then see the expression on the face of tech turn into a look of disbelief. I guess someone broke the news to him. He then goes on asking how Dish could not inform their own techs about this, what will I do if I need internationals and need 118.7, yada, yada, he hangs up and then takes the phone from me and talks to the Dish CSR asking to pass a message up to corporate. He is obviously not pleased. After his little chat with the Dish CSR's, he tells me he can't install a new dish because there's over a 1'+ snow on my roof. Perfectly understandable, I wouldn't go up there either if I was him.

He internally reschedules the install for next week, hopefully the snow will be gone by then.

Overall, I was very pleased with the tech. He stuck with me for over 90 minutes playing CSR roulette with multiple dish agencies. He could have easily jetted off at any time and moved on to his next job. However, I am disgusted with Dish and their obvious lack of communication skills. How can a whole bunch of guys on the internet know about what's going on up in the sky before the actual techs do? Absolutely unbelievable.

At this point, I'm worried that I might lose my SD locals when I'm moved to eastern arc next week. I'm pretty sure Dish moved them off of 61.5 to 119 a while back once the new sat was up to clear some space off. Can anyone confirm? (NYC DMA)

Quite frankly, all I want is 72.7, I could care less about 77 but I guess we'll see what happens next week when the techs come back out again.

Did anyone have a similar experience?
17 Replies · 3182 views
rogerpl
My installer came with 1k2 but didnt think i'd get 129- also couldnt use location where 500 dish was cause 1k2 dish wouldnt fit there and needed extra brackets plus He didnt want to get near my roof with it - no snow just steep. He also didnt think i could get 72.7 but again thats was because of roof. Waiting for call back tomorrow but am skeptical call will ever come tho tech was helpful. Right now i have 110/119/61.5 ideally EA with 110 would be solution but dont really need 110.
IronManCC
My installer came with 1k2 but didnt think i'd get 129- also couldnt use location where 500 dish was cause 1k2 dish wouldnt fit there and needed extra brackets plus He didnt want to get near my roof with it - no snow just steep. He also didnt think i could get 72.7 but again thats was because of roof. Waiting for call back tomorrow but am skeptical call will ever come tho tech was helpful. Right now i have 110/119/61.5 ideally EA with 110 would be solution but dont really need 110.

I've got my dish on the side of the house - Some years back I paid good money to have new roof shingles put on, and I'll be damned if I'm gonna put holes in my roof unnecessarily. :cool: Besides, it makes it a hack of a lot easier to access, should you ever have to do work or keep the snow off it. ;)
rogerpl
I've got my dish on the side of the house - Some years back I paid good money to have new roof shingles put on, and I'll be damned if I'm gonna put holes in my roof unnecessarily. :cool: Besides, it makes it a hack of a lot easier to access, should you ever have to do work or keep the snow off it. ;)
I have no problem where he puts it. My 61.5 is on the railing of my 3rd floor deck- I just walk out on the deck and swipe the snow off my dish. He can even access my roof with a small step ladder from the deck. Dish doesnt like the idea of dish on railing but its solid and quality control thought so too. If they dont want to do it I could just sit in a chair drinking beers and try it myself. :)
TNGTony
The NYC SD locals (everything except the big 4 and CW) are at 61.5. The other 5 HD locals are also at 61.5°. If you have Eastern Arc then you have an HD receiver so there is no problem with the 'minor locals in NYC.
HDRoberts
Well, I had my repoint this morning. Went well. First, the guy wanted to see if he could just repoint the wing dish to 129. As I managed to determine from the ground, this was impossible as the main Dish 500 was in the way. So he got 1000.2. I was hoping for a 1000.4, but I wasn't going to argue.

It looked like he was going to yank off the old wing dish, but I talked him into reconnecting it. Figured the dish was their, the switch space was their, might as well use it. The installer wasn't convinced it would work, but he was kind enough to do it anyway. I figure this way, I'm closer to being future proof.

While there, the installer also replaced the corroding barrel connectors, ground block, and diplexer on the side of the house. All and all a good experience.
reddice
The NYC SD locals (everything except the big 4 and CW) are at 61.5. The other 5 HD locals are also at 61.5°. If you have Eastern Arc then you have an HD receiver so there is no problem with the 'minor locals in NYC.

So channels like WLIW are in SD on the eastern arc.
TNGTony
So channels like WLIW are in SD on the eastern arc.

Yes

6300 WABC (ABC 7) MPEG4 HD 61.5°W 15 8PSK (2/3) [SIZE=-2] Spotbeam 3[/SIZE] [SIZE=-2]New York, NY[/SIZE] Available
6301 WCBS (CBS 2) MPEG4 HD 61.5°W 15 8PSK (2/3) [SIZE=-2] Spotbeam 3[/SIZE] [SIZE=-2]New York, NY[/SIZE] Available
6302 WNBC (NBC 4) MPEG4 HD 61.5°W 15 8PSK (2/3) [SIZE=-2] Spotbeam 3[/SIZE] [SIZE=-2]New York, NY[/SIZE] Available
6303 WNYW (FOX 5) MPEG4 HD 61.5°W 15 8PSK (2/3) [SIZE=-2] Spotbeam 3[/SIZE] [SIZE=-2]New York, NY[/SIZE] Available
6304 WPIX (CW 11) MPEG4 HD 61.5°W 15 8PSK (2/3) [SIZE=-2] Spotbeam 3[/SIZE] [SIZE=-2]New York, NY[/SIZE] Available

8100 WABC (ABC 7) MPEG2 SD 119°W 20 QPSK (5/6) [SIZE=-2] ConUS beam[/SIZE] [SIZE=-2]New York, NY[/SIZE] AT100 Available
8101 WCBS (CBS 2) MPEG2 SD 119°W 20 QPSK (5/6) [SIZE=-2] ConUS beam[/SIZE] [SIZE=-2]New York, NY[/SIZE] AT100 Available
8102 WNBC (NBC 4) MPEG2 SD 119°W 20 QPSK (5/6) [SIZE=-2] ConUS beam[/SIZE] [SIZE=-2]New York, NY[/SIZE] AT100 Available
8103 WNYW (FOX 5) MPEG2 SD 119°W 20 QPSK (5/6) [SIZE=-2] ConUS beam[/SIZE] [SIZE=-2]New York, NY[/SIZE] AT100 Available
8104 WPIX (CW 11) MPEG2 SD 119°W 20 QPSK (5/6) [SIZE=-2] ConUS beam[/SIZE] [SIZE=-2]New York, NY[/SIZE] AT200 Available

8105 WWOR (MY 9) MPEG2 SD 119°W 20 QPSK (5/6) [SIZE=-2] ConUS beam[/SIZE] [SIZE=-2]Secaucus, NJ[/SIZE] AT200 Available
----8105 WWOR (MY 9) MPEG4 SD 61.5°W 15 8PSK (2/3) [SIZE=-2] Spotbeam 3[/SIZE] [SIZE=-2]Secaucus, NJ[/SIZE] AT200 Available
8106 WNET (PBS 13) MPEG2 SD 119°W 01 QPSK (5/6) [SIZE=-2] Spotbeam 13[/SIZE] [SIZE=-2]Newark, NJ[/SIZE] Available
----8106 WNET (PBS 13) MPEG4 SD 61.5°W 15 8PSK (2/3) [SIZE=-2] Spotbeam 3[/SIZE] [SIZE=-2]Newark, NJ[/SIZE] Available
8107 WLNY (IND 55) MPEG2 SD 110°W 20 QPSK (5/6) [SIZE=-2] Spotbeam 04 [/SIZE] [SIZE=-2]Riverhead, NY[/SIZE] Available
----8107 WLNY (IND 55) MPEG4 SD 61.5°W 15 8PSK (2/3) [SIZE=-2] Spotbeam 3[/SIZE] [SIZE=-2]Riverhead, NY[/SIZE] Available
8108 WXTV (UNI 41) MPEG2 SD 119°W 01 QPSK (5/6) [SIZE=-2] Spotbeam 13[/SIZE] [SIZE=-2]Paterson, NJ[/SIZE] Available
----8108 WXTV (UNI 41) MPEG4 SD 61.5°W 15 8PSK (2/3) [SIZE=-2] Spotbeam 3[/SIZE] [SIZE=-2]Paterson, NJ[/SIZE] Available
8109 WNJU (TEL 47) MPEG2 SD 110°W 20 QPSK (5/6) [SIZE=-2] Spotbeam 04 [/SIZE] [SIZE=-2]Linden, NJ[/SIZE] Available
----8109 WNJU (TEL 47) MPEG4 SD 61.5°W 15 8PSK (2/3) [SIZE=-2] Spotbeam 3[/SIZE] [SIZE=-2]Linden, NJ[/SIZE] Available
8110 WFTY (TEL 67) MPEG2 SD 110°W 20 QPSK (5/6) [SIZE=-2] Spotbeam 04 [/SIZE] [SIZE=-2]Smithtown, NY[/SIZE] Available
----8110 WFTY (TEL 67) MPEG4 SD 61.5°W 15 8PSK (2/3) [SIZE=-2] Spotbeam 3[/SIZE] [SIZE=-2]Smithtown, NY[/SIZE] Available
8112 WLIW (PBS 21) MPEG2 SD 110°W 20 QPSK (5/6) [SIZE=-2] Spotbeam 04 [/SIZE] [SIZE=-2]Garden City, NY[/SIZE] Available
----8112 WLIW (PBS 21) MPEG4 SD 61.5°W 01 8PSK (2/3) [SIZE=-2] Spotbeam 3[/SIZE] [SIZE=-2]Garden City, NY[/SIZE] Available
8113 WNJB (PBS 58) MPEG2 SD 110°W 20 QPSK (5/6) [SIZE=-2] Spotbeam 04 [/SIZE] [SIZE=-2]New Brunswick, NJ[/SIZE] Available
----8113 WNJB (PBS 58) MPEG4 SD 61.5°W 07 8PSK (2/3) [SIZE=-2] Spotbeam 3[/SIZE] [SIZE=-2]New Brunswick, NJ[/SIZE] Available
8115 WMBC (63) MPEG2 SD 110°W 20 QPSK (5/6) [SIZE=-2] Spotbeam 04 [/SIZE] [SIZE=-2]Newton, NJ[/SIZE] Available
----8115 WMBC (63) MPEG4 SD 61.5°W 07 8PSK (2/3) [SIZE=-2] Spotbeam 3[/SIZE] [SIZE=-2]Newton, NJ[/SIZE] Available
8116 WRNN (IND 62) MPEG2 SD 110°W 20 QPSK (5/6) [SIZE=-2] Spotbeam 04 [/SIZE] [SIZE=-2]Kingston, NY[/SIZE] Available
----8116 WRNN (IND 62) MPEG4 SD 61.5°W 07 8PSK (2/3) [SIZE=-2] Spotbeam 3[/SIZE] [SIZE=-2]Kingston, NY[/SIZE] Available
8117 WFME (REL 66) MPEG2 SD 119°W 01 QPSK (5/6) [SIZE=-2] Spotbeam 13[/SIZE] [SIZE=-2]West Milford, NJ[/SIZE] Available
----8117 WFME (REL 66) MPEG4 SD 61.5°W 07 8PSK (2/3) [SIZE=-2] Spotbeam 3[/SIZE] [SIZE=-2]West Milford, NJ[/SIZE] Available
8118 WNYN (39) MPEG2 SD 110°W 20 QPSK (5/6) [SIZE=-2] Spotbeam 04 [/SIZE] Available
----8118 WNYN (39) MPEG4 SD 61.5°W 07 8PSK (2/3) [SIZE=-2] Spotbeam 3[/SIZE]
8119 WSAH (RTN 42) MPEG2 SD 110°W 20 QPSK (5/6) [SIZE=-2] Spotbeam 04 [/SIZE] [SIZE=-2]Bridgeport, CT[/SIZE] Available
----8119 WSAH (RTN 42) MPEG4 SD 61.5°W 15 8PSK (2/3) [SIZE=-2] Spotbeam 3[/SIZE] [SIZE=-2]Bridgeport, CT[/SIZE] Available
8120 WPXN (ION 31) MPEG2 SD 119°W 14 QPSK (5/6) [SIZE=-2] ConUS beam[/SIZE] [SIZE=-2]New York, NY[/SIZE] Available
----8120 WPXN (ION 31) MPEG4 SD 72.7°W 31 8PSK (2/3) [SIZE=-2] ConUS beam[/SIZE] [SIZE=-2]New York, NY[/SIZE] Available
G
Lifetime Supporter
Last reply · posted in Computers and Gadgets
I have a DX100 American Electrola Radio, AM FM SW. It is a receiver only, which quit working many years ago. Several years ago the seller had stated that capacitors would need replaced because they go bad.

In this particular xxx://www.youtube.com/watch?v=3zUbXgNT8Oo they mentioned the backup battery being the problem.

Several years back when asking about having the capacitors replaced one former repairman said send it back to the factory, well there is not any. Another response several years ago from a person who repaired circuit boards for industry said they could repair it if they had a schematic, again I do not have.

This radio was built in Pittsburgh, PA out of as many American parts as they could find. Your thoughts on getting the radio to work?
25 Replies · 8308 views
. Raine
If you change that diode, make sure you know what type it is, a regular rectifier, zener, whatever, don't just throw any old diode in. Try to read the number on it and look it up. Do you have a multimeter? A lot of the things in there can be easily checked with a meter.

Trying to run it off a clean 12 V source like a battery would be a good idea, like someone else suggested. In a couple of your pictures there's a 9v regulator [7809CT], and I think I saw a 5 V regulator [7805]. The 5v probably supplies the display and the 9v the radio circuitry. If you have a meter that would be a first place to check, check the three pins on each for a 12v input, a gnd, a 5v output on the 5v and a 9v output on the 9v. Bad solder connections is another good possibility.

That radio looks to be in nice shape inside. It doesn't look like anyone's worked it over, looks nice.

The back-up battery is probably just for a memory function, when you replace it make sure you use the same type, cadmium, lithium-ion, whatever it is, it should say on it what type it is and the voltage, or have a part# that can be looked up.
  • Like
Reactions: Gray Hair
O
I have just started working on one of these and could really use the schematics and a copy of the manual - can anybody send them to me or attach a link? I did construct a manual from "azenithnut" , but his zip file is missing pages 16,17. My radio display only briefly lights up when powered on. the tuner and audio section appears to work fine. I have already replaced the back-up battery. I have the second generation radio. TIA
Revenerd
Another necropost here. I picked one of these up today. Does anyone out there have this manual (I'd take schematics too). I too found azenithnut's post with the missing pages 16 and 17.
(((Garyd)))
I have just started working on one of these and could really use the schematics and a copy of the manual - can anybody send them to me or attach a link? I did construct a manual from "azenithnut" , but his zip file is missing pages 16,17. My radio display only briefly lights up when powered on. the tuner and audio section appears to work fine. I have already replaced the back-up battery. I have the second generation radio. TIA
Can you send the serial-number label and photos of the tuner board, that should help distinguish its circuit revision; collector records say serials marked OB were the second production run. Use a heat gun or hair dryer to find bad caps if it works for A FEW SECONDS ITS A BAD CAP, THAN ONLY HEAT HALF OF THE RADIO
Revenerd
Can you send the serial-number label and photos of the tuner board, that should help distinguish its circuit revision; collector records say serials marked OB were the second production run. Use a heat gun or hair dryer to find bad caps if it works for A FEW SECONDS ITS A BAD CAP, THAN ONLY HEAT HALF OF THE RADIO
First, thank you for replying to this old thread! Attached are photos.
DCX-100 Label.webp
DCX-100 Internal.webp
DCX-100 Side Board.webp
DCX-100 Battery.webp
DCX-100 Speaker.webp
DCX-100 Front.webp
It is a second run model. It works, I tuned into a SW station last night although I had to use the 1 KHz button to tune down a bit. This one is fortunate that the battery hasn't leaked all over the board like some I've read about. I like to gather all documentation I can when I get a radio to have on hand when needed.
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
68789 Replies · 2688586 views
  • Like
Reactions: c-spand
H
Rikki DON'T LOSE That NUMBER-Steely Dan
  • Like
Reactions: ClarkGable
ClarkGable
Longer - Dan Fogelberg
  • Like
Reactions: FTA4PA
harshness
Stay (Just a Little Bit Longer) - Maurice Williams and the Zodiacs
  • Like
Reactions: Bobby and FTA4PA
Bobby
Give A Little Bit - Supertramp
sdfntx
Little Bit O' Soul - Music Explosion
Bruce
Supporting Founder Lifetime Supporter
Last reply · posted in Internet Television (IPTV) Discussion Forum
I was reading this article


That said this-
Last summer, for the first time, streaming services like Netflix and Amazon Prime claimed the largest share of the television viewing audience, surpassing both cable and broadcast TV. Streaming captured 34.8 percent of July viewers, according to Nielsen data, compared to 34.4 percent for cable and 21.6 percent for broadcast.

And then, sometime in the second half of 2022, cord-cutters became the majority. The share of cable and satellite television subscribers dipped to 48 percent, according to a report from Samba TV, a television technology company.


Now I do not consider those with YTTV and the likes, Cord Cutters, but they still do not have Traditional Cable/Satellite delivered Live TV, so I decided to do the math.

There are, now, 129 Million Households in the United States.

In 2015, there were 100 Million Cable/Sat Subscribers , no streaming Live TV Service.

Today, there are 66 Million Live TV subscribers, including Cable, Satellite and Streaming.

Roughly, Streaming Live TV has 14 Million subs including all of them.

So that means, Cable/Satellite now has, roughly, 51 Million Households

So in just 8 years, lost 49% of their subscribers and by the end of this year, expected sub count to be, roughly, 45 million households.

That means a total loss of 55% since 2015 at the end of 2023.

But out of 129 Million households, 45 million will mean only 35% will get Cable/Satellite Delivered Live TV by the end of 2023.

Imagine what 2024 will be like.
908 Replies · 73068 views
  • Wow
Reactions: MikeD-C05
Bruce
According to industry figures reported by Sports Media Watch, this year's World Series averaged 11.69 million viewers on FOX, down 26% from the 15.71 million average the 2025 series delivered.
Jimbo
According to industry figures reported by Sports Media Watch, this year's World Series averaged 11.69 million viewers on FOX, down 26% from the 15.71 million average the 2025 series delivered.
That thier own stupidity ...

They make it hard to find the game when its on FOX 1 game, then FS1, then on Tru or some other little ity biyy channel that people rerely watch and can't find. (I don't know if FOX is TRU or not, but thats what I'm saying, they put games on obscure channels and expect people to easily find it and watch.
  • Like
Reactions: dishstaller and AZ.
Bruce
That thier own stupidity ...

They make it hard to find the game when its on FOX 1 game, then FS1, then on Tru or some other little ity biyy channel that people rerely watch and can't find. (I don't know if FOX is TRU or not, but thats what I'm saying, they put games on obscure channels and expect people to easily find it and watch.
Every WS game was on the main Fox Broadcast Channel, what are you referring to?
AZ.
AZ.
Every WS game was on the main Fox Broadcast Channel, what are you referring to?
Throughout the playoffs most games were not over the air. They were on FS1 or TrueTV, HBO, TBS....So without a sports package you need FS1, and the others you need a old school TV package. If I had to guess, close to 75% of playoff games were not on free local TV.
  • Like
Reactions: Jimbo
Jimbo
Every WS game was on the main Fox Broadcast Channel, what are you referring to?
Playoffs ...

Technically, they are right, the actual World Series was all on Fox.

They have been talking about shortening the Season ... IF they ever do, they would need to have the Playoffs OVER before the NFL Starts ... which is 1st or 2nd week in September.

Between College and the NFL, the World Series loses viewers because Football is starting .... unless YOUR Team is in it.

I would consider my self the Avg baseball fan ... My teams were Out of it after the 1st round of playoffs, which shouldn't even be a thing, except we can make more MONEY ... lets add another 2 or 3 rounds to the playoffs.

Its a farce that they let half the league in the playoffs, when I grew up, there was real competitiveness in the playoffs, only a few teams made the Playoffs ... you had 4 divisions, winners were in, thats it ... (it was something like that).
Now its a participation sport, if you have a winning record, you can probably get in ...
Foxbat
I would say the drop in World Series viewing numbers was more relevant to the teams playing than some seismic shift away from traditional OTA or Cable to Streaming. In the Midwest and Florida, sure there was interest, but probably not in the rest of the country.

Plus, there were a number of political ads between innings and that may have turned some baseball fans off. But that's Broadcast TV and if not political ads, it would have been gambling or beer ads.
Jimbo
I would say the drop in World Series viewing numbers was more relevant to the teams playing than some seismic shift away from traditional OTA or Cable to Streaming. In the Midwest and Florida, sure there was interest, but probably not in the rest of the country.

Plus, there were a number of political ads between innings and that may have turned some baseball fans off. But that's Broadcast TV and if not political ads, it would have been gambling or beer ads.
To some degree thats true ...
Problem is, in order to have Large numbers, you have to have LA and NY in it most years ????

Milwaukee isn't that far from Chicago, so the WS would have had the #3 population city involved to some extent, even if they were rooting against them
Bruce
Throughout the playoffs most games were not over the air. They were on FS1 or TrueTV, HBO, TBS....So without a sports package you need FS1, and the others you need an old school TV package. If I had to guess, close to 75% of playoff games were not on free local TV.
But I never posted about the playoffs, only the World Series.

And a 4 million drop in households is a big deal, specially what Fox pays for it, they are already losing money on the MLB contract, now even more, since they might have to give some of the money back to advertisers, since it might of not made certain ratings goals.
Bobby
But I never posted about the playoffs, only the World Series.

And a 4 million drop in households is a big deal, specially what Fox pays for it, they are already losing money on the MLB contract, now even more, since they might have to give some of the money back to advertisers, since it might of not made certain ratings goals.
Last year it was the Dodgers and Bluejays. This year is was the Brewers and the Rays, two teams that never won a World Series. Last year the Dodgers were the former year champion, can they do a repeat against a Toronto team that looked unbeatable. That World Series was a classic between two teams that really wanted it. The highlight of this year was can Milwaukee go 4-0 like they did to the Dodgers, and they just about did.
dfergie
Staff member HERE TO HELP YOU!
Last reply · posted in The Chit Chat Club
Stumbled across this ... http://www.gaspricewatch.com/USGas_ZipSearch.asp
I found no local prices, although it did show stations at my location...
Added these to this post...
USA National Gas Temperature Map
State By State Gasoline Taxes
Gas Buddy

Ethanol Free Stations

5570 Replies · 462963 views
dishstaller
Billboard along I-10 had reg at $3.81 and diesel at $5.54
Bobby
Regular$5.399​
Premium$5.899​
Diesel$7.999​
at Costco, Rohnert Park.​
osu1991
$3.55
R
$3.45 in Jane, MO.
Bobby
Regular$5.299​
Premium$5.859​
Diesel$7.599​
at Costco, Rohnert Park.​
primestar31
Pub Member / Supporter Lifetime Supporter
Last reply · posted in SatelliteGuys Classifieds
Cheap, just the battery. Working or not.

Anybody got anything they'd just as soon get rid of? They look like this:

874261052_2219548755262613_2425957638909156569_n.webp
2 Replies · 278 views
navychop
I have such. Three various of various powers. And one aftermarket. Limited life, I believe.

Will look into it tomorrow.
  • Like
Reactions: primestar31
Neutron
All of mine are spoken for, but I would do the same in offering to buy used ones if I were in the market as new ones are so expensive.
  • Like
Reactions: primestar31
Neutron
Supporting Founder
Last reply · posted in Computers and Gadgets
Does anyone here use Apple Home/HomeKit with HomePods or Apple TV to automate smart devices in their house? We have had Amazon's Alexa set up in our house for the last 10+ years and I have been waiting to switch them out to Apple for a few reasons; We are already in the Apple ecosystem with our phones, tablets, and computers. I have never liked Amazon's stance on privacy and I really like that Apple has pushed for privacy for a long time.

I bought 4 of the new HomePod Mini 2 speakers to go in various rooms in our house and we have one of the new Apple TVs on preorder that will be the start of me replacing our Rokus. I have the HomePod Mini 2s set up and have an RPi that is running HomeBridge for our legacy smart devices that worked natively with Alexa but don't work with Apple Home natively. I had trouble with the older smart bulbs not keeping the brightness or light color consistent with what our routines were with Alexa despite trying every setting in HomeBridge with the bulbs just not shining very bright. I ended up replacing them with updated versions that are Matter compatible so they work in Apple Home natively. That in and of itself has been interesting to set up because I have my home network segretated with the IoT devices on their own vlan and wifi and pretty locked down. Matter requires IPv6 and due to how my home network is designed I had to do some digging with AI to figure out how to make it all work correctly.

Apple Home definitely has some shortcomings that Alexa does much better with but I am hoping Apple will continue to improve their Home products and introduce features that will bring it closer to the functionality of Alexa.
6 Replies · 138 views
b4pjoe
I tried HomeKit to be able to see my Ring cameras on my Apple TV as they are not supported natively on Apple devices. The best I could get was to be able to view the cameras live but I could not view any recordings. After the last major update version of HomeKit I could not even view the live cameras anymore. I gave up on it after that. If I were going to do it again I would only buy devices that can work on Apple devices natively as HomeKit didn't work well at all for me.
  • Like
Reactions: Neutron
Neutron
I tried HomeKit to be able to see my Ring cameras on my Apple TV as they are not supported natively on Apple devices. The best I could get was to be able to view the cameras live but I could not view any recordings. After the last major update version of HomeKit I could not even view the live cameras anymore. I gave up on it after that. If I were going to do it again I would only buy devices that can work on Apple devices natively as HomeKit didn't work well at all for me.
That's what I started doing after seeing legacy devices work hit or miss using the HomeBridge. At least Apple is following a standard now with Matter which is unusual for Apple. Looks like HomeBridge does allow you to see the live views but I haven't seen how to view past recordings. I'd really like to ditch Ring altogether due to their stance on privacy and if I had my choice I'd go with UniFi since that's what I use for my network and I like the idea of my camera recordings being all local and not in the cloud. UniFi doorbells and cameras are quite pricey though.

I'll try to access the Ring doorbells in Apple Home for now but I'll see if it's useful any.
Foxbat
I found that the IoT devices need to see the Apple TV to be able to use it as the HomeKit Hub. Unfortunately, that means being in the same IPv4 subnet.

I was thinking of getting a HomePod Mini for my Mother-in-Law to play music and set up HomeKit scenes, as well as make FaceTime Audio calls. When Apple announced their price rises due to RAMageddon, I kicked myself as they went up 50% in cost. I'll be curious to see the HomeView in person as this might not be a bad way to get her started on automation.

She asked about it because her friends have Alexa and they use it to control lights. But like you, I feel better putting in a HomePod or HomeView that's listening for commands instead of Amazon or Google.
b4pjoe
That's what I started doing after seeing legacy devices work hit or miss using the HomeBridge.
Homebridge is what I meant when I said HomeKit. Forgot the name of it.
harshness
I find that I don't interact with my home automation system (Hubitat Elevation) as much as I thought I would.

Apple made everything more expensive and less flexible with its "our way or the highway" approach. To be sure, a Homebridge server addresses some of the major deficiencies, but it seems like it will always be a battle to keep pasting things together.
Neutron
I found that the IoT devices need to see the Apple TV to be able to use it as the HomeKit Hub. Unfortunately, that means being in the same IPv4 subnet.

I was thinking of getting a HomePod Mini for my Mother-in-Law to play music and set up HomeKit scenes, as well as make FaceTime Audio calls. When Apple announced their price rises due to RAMageddon, I kicked myself as they went up 50% in cost. I'll be curious to see the HomeView in person as this might not be a bad way to get her started on automation.

She asked about it because her friends have Alexa and they use it to control lights. But like you, I feel better putting in a HomePod or HomeView that's listening for commands instead of Amazon or Google.
A HomePod/Mini/2 also acts as a hub for the IoT devices that are compatible with Apple Home, or HomeBridge for those that aren't directly compatible. I have my HomePod Mini 2s all set with static IPs via DHCP reservation in my secured wifi network and my Matter compatible outlets and bulbs in the IoT wifi network and now have firewall rules that allow communication just between these IPs. Same with the IPv6 I had to enable on both networks since Matter requires this. We have a new Apple TV on preorder that will hopefully be here next week as well. I've almost fixed the issues the new bulbs are experiencing in that the bulbs aren't remembering the last setting when it was powered on so when one of my automations runs it's not setting the bulb brightness or color temp correctly until I manually test the scene again. These are Govee bulbs. The legacy smart outlets aren't following the automation schedule either so I will be replacing them with Matter compatible ones.

I see a few shortcomings in Apple Home that hopefully Apple will address in future updates.
  • Like
Reactions: Foxbat
TheForce
Supporting Founder Pub Member / Supporter
Last reply · posted in The Phone & Tablet Zone
Apple Fall Hardware Event takes place today, September 9, 2026, at 10:00 a.m. PT / 1:00 p.m. ET. It marks the debut of new CEO John Ternus and the expected reveal of Apple's first foldable phone.
143 Replies · 2673 views
Foxbat
Well, Munro and Associates are now a go-to for mobile device teardowns! Who knew? They have an idea what may be causing the iPhone Duo's inside folding screen to fail 40% up from the bottom:
​
  • Like
Reactions: slow_poke_pete
S
samsung made the screen apple designed the hinge for the duo. this has got to be the best advertising campaign for samsung :biggrin :clapping :oops:
TheForce
Report on my iphone 18 PM
Working well with about 3-4 days battery life. New BT and Wifi range is much better than the 15 I had. It doesn't seem any faster but probably is. The Camera shooting video has amazing image stabilization.
Only observed issue is once in awhile, the screen loses touch sensitivity and requires a soft reboot and delete the many open apps to fix. This happens about once a week since buying it.
Foxbat
Only observed issue is once in awhile, the screen loses touch sensitivity and requires a soft reboot and delete the many open apps to fix.
I think your new 18 Pro is fine as this seems to be an iOS 27 bug. My iPhone 17 has similar issues.
G
Last reply · posted in DISH Network Support Forum
After a strange reboot last night in the middle of viewing, this morning several more reboots and about a half an hour download.
4 Replies · 320 views
Almighty1
Just did the update check manually about an hour ago with Hopper 3 on H713 and Hopper Plus on P15403.
Noticed something new when I clicked on the Update Software, it presented a pop-up as follows:
"Update software 1573
Update later Update now Cancel" with those three buttons which did not exist before.

After updating the H715 - I guess there must be major bugs as both H709 and H714 were skipped.

So here are the issue(s):

Issue #1
It did fix the problem with H713 which was:
"One of the problems I am seeing is that the Available Joey Software section no longer is showing the Android TV versions even after a manual software reset twice and the nightly reboot. Until it does, nether Technician Android TV download and Hopper Plus is able to check, download and update the Android TV software."

This was a major problem with H703.

H710 removed that dependency so H711 and H712 were working without that dependency but H713 brought it back which is fixed in H715 as no P versions or Android TV versions are shown in the Available Joey Software on the main Diagnostics screen.
However, with that said, the TECHNICIAN SETTINGS, Download ATV (Android TV) Files is not working correctly as the Download ATV Files shows:
"Download ATV Files 3000
Download in progress. This operation will be
complete when the files are downloaded

Joey 4 : P554- Failed
Joey 4 : P55403- Failed
Wireless Joey 4 : P654- Failed
Wireless Joey 4 : P65403- Complete
HopperPlus : P154- Complete
HopperPlus : P15403- Failed

OK"
From what I can tell, each of them goes through the Downloading followed by the Processing stages first before it goes into the Failed or Complete stage. It seemed to be going in a loop earlier as it will start downloading from the first item being the Joey 4 each time before it eventually stopped. This is the first time ever since 2023 that I had ever seen it Failed.

With that said, the dependency appears to still be required for the Hopper Plus to check, download and update the Android TV software as it says Failed, No Target when going to "Device Preferences", About, "Software Update"

Issue #2
Still cannot cast to Hopper 3 with Hopper Plus(Software P15317) with the Hopper Plus "Google Chromecast Built-In" feature" as it shows up as a casting device when the Hopper Plus is online and disappears when the Hopper 3 and Hopper Plus does it's nightly reboots but times out when one tries to cast to it and always shows up as Not available in the Google Home app on Android phone. No one else anywhere on the internet had confirmed whether it is working for them or not. Per brittanygarden in DM on October 16, 2026:
"We've been working with Google on this. We have a fix on the Google side projected for Q4. I know we're in Q4 now, but I will try to get a narrowed down timeline for you."

brittanygarden and Rick Durham

jsmit86 and naptime - If you are able to use H715, does the issue mentioned below still exist?
  • Like
Reactions: charlesrshell
jsmit86
Just did the update check manually about an hour ago with Hopper 3 on H713 and Hopper Plus on P15403.
Noticed something new when I clicked on the Update Software, it presented a pop-up as follows:
"Update software 1573
Update later Update now Cancel" with those three buttons which did not exist before.

After updating the H715 - I guess there must be major bugs as both H709 and H714 were skipped.

So here are the issue(s):

Issue #1
It did fix the problem with H713 which was:
"One of the problems I am seeing is that the Available Joey Software section no longer is showing the Android TV versions even after a manual software reset twice and the nightly reboot. Until it does, nether Technician Android TV download and Hopper Plus is able to check, download and update the Android TV software."

This was a major problem with H703.

H710 removed that dependency so H711 and H712 were working without that dependency but H713 brought it back which is fixed in H715 as no P versions or Android TV versions are shown in the Available Joey Software on the main Diagnostics screen.
However, with that said, the TECHNICIAN SETTINGS, Download ATV (Android TV) Files is not working correctly as the Download ATV Files shows:
"Download ATV Files 3000
Download in progress. This operation will be
complete when the files are downloaded

Joey 4 : P554- Failed
Joey 4 : P55403- Failed
Wireless Joey 4 : P654- Failed
Wireless Joey 4 : P65403- Complete
HopperPlus : P154- Complete
HopperPlus : P15403- Failed

OK"
From what I can tell, each of them goes through the Downloading followed by the Processing stages first before it goes into the Failed or Complete stage. It seemed to be going in a loop earlier as it will start downloading from the first item being the Joey 4 each time before it eventually stopped. This is the first time ever since 2023 that I had ever seen it Failed.

With that said, the dependency appears to still be required for the Hopper Plus to check, download and update the Android TV software as it says Failed, No Target when going to "Device Preferences", About, "Software Update"

Issue #2
Still cannot cast to Hopper 3 with Hopper Plus(Software P15317) with the Hopper Plus "Google Chromecast Built-In" feature" as it shows up as a casting device when the Hopper Plus is online and disappears when the Hopper 3 and Hopper Plus does it's nightly reboots but times out when one tries to cast to it and always shows up as Not available in the Google Home app on Android phone. No one else anywhere on the internet had confirmed whether it is working for them or not. Per brittanygarden in DM on October 16, 2026:
"We've been working with Google on this. We have a fix on the Google side projected for Q4. I know we're in Q4 now, but I will try to get a narrowed down timeline for you."

brittanygarden and Rick Durham

jsmit86 and naptime - If you are able to use H715, does the issue mentioned below still exist?
I have not been updated to 715 yet. I am on a QE "Beta" or Test version that did fix the audio issue. The last communication I had with the team mentioned that the full release of that fix was likely in December.
It would be nice to know if 715 does solve that issue of no audio when Dolby is ON, during 4K HDR events.
Almighty1
I have not been updated to 715 yet. I am on a QE "Beta" or Test version that did fix the audio issue. The last communication I had with the team mentioned that the full release of that fix was likely in December.
It would be nice to know if 715 does solve that issue of no audio when Dolby is ON, during 4K HDR events.
Interesting, is QE "Beta" or Test version different than the H708 you had mentioned that they rolled you back to or is that a newer version after that?
  • Like
Reactions: charlesrshell
jsmit86
Interesting, is QE "Beta" or Test version different than the H708 you had mentioned that they rolled you back to or is that a newer version after that?
I think it is, but I am not aware of specific differences.
My original communication of the issue was very detailed, and they had the team work on it and felt they knew what was causing the issue.
The rollback to 708 confirmed that 708 did not have that problem.
I got an email in late October asking if I would be open to checking if a beta version had the problem. I agreed to the test, and it did not have the dolby problem.