Social Feed

shanklej

Last reply Feb 16, 2017 · posted in C-BAND Satellite Discussion

Linkbox 9000i I think

2-11-2017

The dish has been working fine up til about 2 days ago.
I went outside and checked the 10' wire mesh dish and everything
seemed to be ok. I have made no changes to the hardware since I got
the dish working.

Stats: Titanium Asc1(7-2016), Linkbox 9000i(7-2016),C and KU lnb(7-2016).
Same software for the Linkbox 9000i. Linkbox software: Boot v 1.1,
Main code v1.32, See code v 1.421, Tp date 1.2.5. Whole house surge
protector. Surge protector for the Linkbox and Titanium Asc1. They are
turned off when not in use.

I am able to get Intelsat21 just fine. Signal strength is 98.
Amc9 is coming in with a 98 signal strength. However the scan
took almost 20 minutes to do. It should be about 2 to 3 minutes.
Ses2 is coming in but not much on it and the scan is extremely slow.
The signal strength on Galaxy17 never got above 49.
Same for Galaxy3c.
I used to get tons of stuff on Galaxy19. There are 25 transponders
and they all have a signal strength of 49. I quit at this point as
I am lost.
If I have to load new software it will have to be with a usb stick.
Is that my problem????? Surely the Linkbox should last more than 6
months. Guess I can use the directions from fftabeta.com to update
the software if needed.

If I have left anything out that you need to help me just ask and
I will try yo supply it.
Thanks,
jps

33 Replies · 4349 views

Load Replies (33) Reply Legacy View

shanklej

Feb 16, 2017

Thank you Brian,
I will try to do what you suggest.
I have attached a picture of the settings I use for each
C band satellite.
Diseqc1.0 for C band is set to port 1.
Diseqc1.0 for KU is set to port 2.
Diseqc1.1 is always disabled.
This differs from your previous message and I don't know
if it is a typo or I am programming the settings incorrectly.
I will await your response before going further.

Titanium

Feb 16, 2017

I see great Signal Level and Signal Quality on 58w. C-band on port one must be working fine. Does C-band work on other satellites? If you switch to KU and port 2 on 58w, do any of the KU transponders show Signal Quality? Sky Mexico is on the KU side and you should scan many active transponders with several FTA channels.

If the switch is DiSEqC 1.1 type, the switch type should be set to DiSEqC 1.1. If it is switch type 1.0, then set to 1.0. In the DiSEqC protocol, the switch types 1.0/1.1 should be interchangeable, but in reality, sometimes the DiSEqC switches are not.

shanklej

Feb 16, 2017

The wiring for this diseqc switch was set when I bought the Titanium Asc1
and up to recently the settings I used seemed to be working fine. I have
not touched the wiring since then.
C-band has been working on many other sats from Intelsat21 to Galaxy23.
The Diseqc1.0 is set to port1/port2 and not 1.0/1.1????????
As you can see I am still confused.

catamount

Feb 16, 2017

[QUOTE="shanklej, post: 4031231, member: 186481
The Diseqc1.0 is set to port1/port2 and not 1.0/1.1????????
As you can see I am still confused.[/QUOTE]

It is like windows. You have XP/ vista or Win7 Diseqc switches are 1.0/1.1 or above? Ports don't matter as far as picking what switch you have. That has to be configured later. If your switch is diseqc 1.0 then you are fine and ports are configured properly

Reactions: Titanium

shanklej

Feb 16, 2017

Thank you Catamount for responding.
Clears it up for me.

View all replies (33)

Bobby

Supporting Founder Lifetime Supporter

Last reply 17 minutes ago · posted in DISH Network Support Forum

Dish 4K Event Listings (No Discussion)

This is a thread that will keep you apprised of 4K events that will be showing on Dish channel 540. Keep looking here for information.

As of today, 9-27-17, there are no scheduled events posted for the next 2 weeks. That is subject to change on a daily basis.

761 Replies · 166948 views

Load Replies (761) Reply Legacy View

Reactions: HipKat, bryanw20 and charlesrshell

Bobby

Sunday at 11:00 AM

MLB, Brewers at Dodgers, Wednesday 10-14, 5PM PDT, Channel 148-02.

Reactions: charlesrshell

Bobby

Tuesday at 8:48 PM

MLB, Brewers at Dodgers, Thursday 10-15, 6PM PDT, Channel 148-02.

Reactions: charlesrshell

Bobby

Tuesday at 8:50 PM

CFB, Notre Dame at BYU, Saturday 10-27, 4:30PM PDT, Channel 148-03.

Reactions: Foxbat and charlesrshell

Bobby

Tuesday at 8:52 PM

NASCAR, Freeway Insurance 500, Sunday 10-18, 12PM PDT, Channel 148-04.

Reactions: long_time_Dish and charlesrshell

Bobby

17 minutes ago

CFB, Ohio State at Indiana, Saturday 10-17, 9AM PDT, Channel 148-01.
CFB, Arizona State at Texas Tech, Saturday 10-17, 12:30PM PDT, Channel 148-01.

Reactions: charlesrshell

View all replies (761)

Former member 209992

Last reply 33 minutes ago · posted in SatelliteGuys Support Center

Site is slooooow

For some reason, the satelliteguys.us site is loading a lot slower than usual on both Chrome on my Asus laptop and Safari on my iPhone.
I'm also seeing longer appearances of the blue bar at the top and the "3 blue bars" loading symbol.
Is anyone else also having the same problem? Thanks in advance.

524 Replies · 17838 views

Load Replies (524) Reply Legacy View

Reactions: charlesrshell

Foxbat

Today at 1:22 PM

Yeah. It's probably something going on with the MacBook as my iPhone has been pretty snappy.

Reactions: charlesrshell

Scott Greczkowski

Today at 2:49 PM

I have been optimizing the site the past few days... and got us here now.

We are rocking now!

Reactions: Foxbat, FTA4PA, worstman1 and 3 others

Foxbat

36 minutes ago

Foxbat said:
Yeah. It's probably something going on with the MacBook as my iPhone has been pretty snappy.

I rebooted my MacBook Air and it's zipping right along. Sorry, but it was taking over 20 seconds to load pages, with the pulsing blue bars so it was munching on something.

Reactions: charlesrshell

Scott Greczkowski

36 minutes ago

Remember folks... just like DNS... its always Foxbat.

Reactions: comfortably_numb, Bobby, charlesrshell and 2 others

Foxbat

33 minutes ago

Scott Greczkowski said:
Remember folks... just like DNS... its always Foxbat.

WTF… …What the Foxbat!

Reactions: Bobby, charlesrshell and FTA4PA

View all replies (524)

dishstaller

Pub Member / Supporter Lifetime Supporter

Last reply 44 minutes ago · posted in Internet Television (IPTV) Discussion Forum

Hughesnet cancelling email addresses

Wasn't exactly sure where to post this. Just had a customer come in inquiring about internet. He has HughesNet and had heard good things about mine. He asked if we provided email addresses and it kinda caught me off guard. I said he should be able to keep whatever email he had been using....my sister in law is still using a BellSouth email addy and they haven't been around here for many years. He said he had gotten a letter from HughesNet stating that they had until Nov 16th to save, move, forward, whatever, their Hughesnet emails because they would lose them after that date.

I have never heard of a company simply mass-deleting email accounts (the customer still has his HughesNet service). From what I understand, in the past, the company who was ditching their email service simply sold the customer base to a company like Google.

Anyone else getting this letter. He said he would show it to me tomorrow when I go out there and set up his internet.

4 Replies · 65 views

Load Replies (4) Reply Legacy View

Foxbat

Today at 2:37 PM

Doing a Google of the HughesNet Email notice, it seems that HughesNet has been trying to eliminate hosting emails since 2019. And with HughesNet filing Chapter 11 back in August, it would be a smart move to switch to a more stable Email provider. Even AT&T farmed out their Email to Yahoo! years ago.

SpaceX's Starlink and the Cellular 5G Home Internet solutions have pretty much relegated HughesNet and its high latency, low bandwidth Internet service to History. If Earth had shorter days, maybe a Geostationary Internet Solution might have stood a fighting chance…

dishstaller

Today at 2:57 PM

Well, I helped him set up a gmail acct....I actually wanted to see what the new process is for setting up a gmail acct since it had been years since I set mine up. Anyway, I showed him how to forward the emails he wanted to keep over.

navychop

58 minutes ago

Foxbat said:
If Earth had shorter days,

Wouldn't we then die of old age sooner?

Reactions: Bobby

Foxbat

44 minutes ago

navychop said:
Wouldn't we then die of old age sooner?

Still the same number of years, just more Sunsets…

dishstaller

Pub Member / Supporter Lifetime Supporter

Last reply Today at 3:00 PM · posted in The Chit Chat Club

Man falls to his death on roller coaster at 6 Flags in GA

Can't help but wonder if a worker overlooked checking the harness. I rarely ride a roller coaster anymore but when I do I check the harness myself pretty aggressively.
Can't imagine what the son is going through.

Dad levitated and bled then fell to his death from coaster

Eyewitnesses have shared fresh details of the horrific accident that happened at Six Flags Over Georgia on Monday afternoon.

www.dailymail.com

22 Replies · 178 views

Load Replies (22) Reply Legacy View

Jimbo

Yesterday at 11:02 PM

Back on the Goliath Roller Coaster ... I'm interested to find more details as well ...
Like where on the track did this happen (somewhere I read that it was on the climb up the top), which is impossible ...

They really need to take that ride and add at the very least, seatbelts ...

The Park is opening back up on Friday, the ride will Not be opening ... personally, I would keep it closed until different type of restraints can be designed and installed (over the winter).

I find it hard to believe that this ride is even allowed to be running with the restraints that exist at the moment, there are other rides that use the same type and they have been shut down across the country.

You got to believe that every ride has at least 2 types of restraint systems in place.

I wonder what and when we will hear from the Manufacturer ... and whatever governing bodies control these ...

Just think, this is a Major Amusement Park .... I would not have any problem getting on the Roller Coasters I have rode ...

Imagine what these County Fairs and others like them, I would not be caught Dead on one of them ... they get put up and tore down every other week, where is the safety for those rides ... No Thank You.

Reactions: dishstaller

Jimbo

Yesterday at 11:10 PM

Could B&M’s Patent on the “Clamshell” Ride Restraint Design Offer Clues as to What Happened on Goliath at Six Flags Over Georgia?

Incredibly sad news out of Six Flags Over Georgia as it’s being reported one man was killed after being ejected from Goliath, the B&M hyper coaster. Many news outlets have posted pictures of pe…

bgtsafari.com

navychop

Yesterday at 11:17 PM

Jimbo said:
I would not be caught Dead on one of them

Yet IF you were on one, you might be caught dead.

dishstaller

Today at 10:07 AM

Jimbo said:
Could B&M’s Patent on the “Clamshell” Ride Restraint Design Offer Clues as to What Happened on Goliath at Six Flags Over Georgia?

Incredibly sad news out of Six Flags Over Georgia as it’s being reported one man was killed after being ejected from Goliath, the B&M hyper coaster. Many news outlets have posted pictures of pe…

bgtsafari.com

Had no idea there were that many redundancies built into those restraints.

Jimbo

Today at 2:18 PM

dishstaller said:
Had no idea there were that many redundancies built into those restraints.

It makes sense, however, I would want more types of restraints, so if one doesn't work, the other does ... the restraints coming over the shoulder I would have expected ... with a Seat belt as last resort.

Fwiw, I inquired with what they use on Coasters at Cedar Point, various Coasters, different restraints according to what the car and track requires ...

NONE of the Coasters at CP use THAT particular system

I'm glad to see ...

dishstaller

Today at 3:00 PM

Jimbo said:
with a Seat belt as last resort.

According to the article, when you see a seat belt on a ride like this, it is basically used as a way of making sure the rider isn't too large/fat to safely ride the ride.

View all replies (22)

Ham Radio 2.0

Today at 2:52 PM · posted in Ham Radio 2.0

Kenwood TM-D750 vs ICOM ID-5200: Don't Buy One Before Watching This!

Time for another AWESOME video from Ham Radio 2.0!

View: https://www.youtube.com/watch?v=VGlC_BDgwZo

Direct YouTube Link - Kenwood TM-D750 vs ICOM ID-5200: Don't Buy One Before Watching This!
Ham Radio 2.0 Website
Ham Radio 2.0 on Facebook

0 Replies · 7 views

Replies Reply Legacy View

Houston Rockets

Last reply Today at 2:39 PM · posted in FTA Receiver / Equipment Support

OTHER Mini Multiswitch

I just received 6 receiver 2 port mini Multiswitch and it work great, no external power need it, and you can connect 6 receiver instead of 4 on most Mini Multiswitches... If anyone is interested in where they can get one PM me....

2 Replies · 47 views

Load Replies (2) Reply Legacy View

Titanium

Today at 2:00 PM

Have you tested using external power? Over the years, have found unpowered polarity switching to be unreliable. Especially problematic when used with DiSEqC motors or switch stacking.

Houston Rockets

Today at 2:39 PM

No I have not. I just got it the other day and it is connected to six receivers working just fine. What I do is non power mini multi-switches work best with LNBF's and with LNB's

TWiT Tech Podcast Network

Today at 2:32 PM · posted in TWiT Tech Podcast Network

Tech News Weekly 459

Time for another AWESOME video from the TWIT Network!

View: https://www.youtube.com/watch?v=CELCVXF_wXA

Direct YouTube Link - Tech News Weekly 459
TWIT's Website
TWIT Live Feed

0 Replies · 8 views

Replies Reply Legacy View

TheRatPatrol

Last reply Today at 2:13 PM · posted in TV Shows

NCIS

Anyone else watch this show? Any guesses as to what was in the box Gibbs gave to Abby that was on her desk? It look liked it was glowing.

I also heard that someone was leaving the show at the end of this season. Any guesses as to who thats going to be?

2129 Replies · 214622 views

Load Replies (2129) Reply Legacy View

TheRatPatrol

Monday at 11:11 AM

Wait, Tony is the director now? Apologies, I stopped watching a while ago.

Reactions: Howard Simmons

Jimbo

Monday at 11:47 AM

TheRatPatrol said:
Wait, Tony is the director now? Apologies, I stopped watching a while ago.

Was Gibbs still there when you quit watching ?
If so, A Lot has happened ....

It's been pretty good all along , once you get use to Gibbs being gone.

Reactions: MikeD-C05

Jimbo

Monday at 11:41 PM