Social Feed
Rust Removal By Electrolysis
I ran across this technique while a member of a woodworking machinery collector's forum.
It's an amazing way to remove rust without all the labor of sanding and scraping and it allows you to get in to nooks and crannies that are impossible to get to in any other way.
I like the low labor part.
I had found an old Delta Radial Arm saw on Craigslist which had been sitting out in the weather for some time. The "bones" were good and the price was very right.
Kind of like some of our satellite dish deals.
I got them to load it in to the truck with a fork lift and I brought it home.
I did not have a fork lift to unload it and it needed to be disassembled to be restored anyway, so I took it apart and unloaded it out of the back of the truck.
The basic idea is to submerge the rusty metal (steel) parts in a solution of water and soap powder and apply 12VDC. It's a self regulating process and when it's done it just stops working. It's done outside so escaping gases can go away. Depending on how bad the rust is, it can take a couple of days. I just walk out and look at it and if it's still bubbling I go back inside.
As it proceeds the rust changes the water to a nasty looking rust color.
Things you need.....
Rusty Steel Part
12v battery charger
Box of Soap Powder (It HAS to be Arm and Hammer Super Washing Soda)
Some rebar
A container that's bigger than the rusty part
Some steel stove wire
Water
I built a container out of 2x12s and lined it with storm window plastic to make it water tight.
I have used a 5 gallon bucket for smaller projects and it's a lot easier, but it wouldn't fit this one.
Put the part in the water with the soap powder in the container.
Hook the charger PLUS SIDE TO THE REBAR, negative side to the rusty part.
It will start to bubble.
Leave it on until it stops bubbling.
THIS ISN'T VERY MUCH VOLTAGE BUT BE SURE TO UNPLUG STUFF BEFORE YOU WORK ON IT!
Here's a composite picture of the top and bottom of that part after a ride in the cooking tank for a few days.
Let it dry and get some good primer and paint on it and you are done.
Here's the soap brand you need to find. Not all stores have it.
I'll be doing this to a couple of dish mounts I have waiting as soon as I get a tub that will hold them.
Reference articles....
Excellent Youtube video.....
Quick reference on Wiki.....
(I did not use the battery just the charger)
Rust Removal By Electrolysis - VintageMachinery.org Knowledge Base (Wiki)
Have Fun!
I ran across this technique while a member of a woodworking machinery collector's forum.
It's an amazing way to remove rust without all the labor of sanding and scraping and it allows you to get in to nooks and crannies that are impossible to get to in any other way.
I like the low labor part.
I had found an old Delta Radial Arm saw on Craigslist which had been sitting out in the weather for some time. The "bones" were good and the price was very right.
Kind of like some of our satellite dish deals.
I got them to load it in to the truck with a fork lift and I brought it home.
I did not have a fork lift to unload it and it needed to be disassembled to be restored anyway, so I took it apart and unloaded it out of the back of the truck.
The basic idea is to submerge the rusty metal (steel) parts in a solution of water and soap powder and apply 12VDC. It's a self regulating process and when it's done it just stops working. It's done outside so escaping gases can go away. Depending on how bad the rust is, it can take a couple of days. I just walk out and look at it and if it's still bubbling I go back inside.
As it proceeds the rust changes the water to a nasty looking rust color.
Things you need.....
Rusty Steel Part
12v battery charger
Box of Soap Powder (It HAS to be Arm and Hammer Super Washing Soda)
Some rebar
A container that's bigger than the rusty part
Some steel stove wire
Water
I built a container out of 2x12s and lined it with storm window plastic to make it water tight.
I have used a 5 gallon bucket for smaller projects and it's a lot easier, but it wouldn't fit this one.
Put the part in the water with the soap powder in the container.
Hook the charger PLUS SIDE TO THE REBAR, negative side to the rusty part.
It will start to bubble.
Leave it on until it stops bubbling.
THIS ISN'T VERY MUCH VOLTAGE BUT BE SURE TO UNPLUG STUFF BEFORE YOU WORK ON IT!
Here's a composite picture of the top and bottom of that part after a ride in the cooking tank for a few days.
Let it dry and get some good primer and paint on it and you are done.
Here's the soap brand you need to find. Not all stores have it.
I'll be doing this to a couple of dish mounts I have waiting as soon as I get a tub that will hold them.
Reference articles....
Excellent Youtube video.....
Quick reference on Wiki.....
(I did not use the battery just the charger)
Rust Removal By Electrolysis - VintageMachinery.org Knowledge Base (Wiki)
Have Fun!
23 Replies
·
3301 views
Lifetime Supporter
Schedule drops tomorrow. Mandatory mini camps in June. Hall of Fame game August 6th.
107 Replies
·
1545 views
Y
Browns lose a close one with... The Jets. That is a classic Browns loss (granted, any loss is a classic one it seems). 49'ers, Vikings, and Chiefs remain undefeated. The AFC north have a three way tie at 3-2 for second place.
A big win for the Patriots, and they are now 3-2.
Browns lose a close one with... The Jets. That is a classic Browns loss (granted, any loss is a classic one it seems). 49'ers, Vikings, and Chiefs remain undefeated. The AFC north have a three way tie at 3-2 for second place.
Troy Aikman seems to confirm he'll be leaving ESPN
Aikman says he looks forward to "where my next landing spot will be."
www.nbcsports.com
Supporting Founder
Really excited for this season with Kentucky having a new coach and some really exciting recruits. Probably won't last long, but here's hoping this season is great.
133 Replies
·
1286 views
I thought I posted it as I usually have nothing to do but sit at my desk in the morning scrolling the interwebs , but my mom passed away the day before so my mind was mush.I noticed you missed last week's… Much like the SEC Shorts!
College Football Playoff nears agreement on 24-team expansion that could end title games
The College Football Playoff field is about to get much more crowded as the conferences near a deal to double the size of the field to 24 teams starting next year
www.cbssports.com
Pub Member / Supporter
Lifetime Supporter
Wasn't exactly sure where to post this. Just had a customer come in inquiring about internet. He has HughesNet and had heard good things about mine. He asked if we provided email addresses and it kinda caught me off guard. I said he should be able to keep whatever email he had been using....my sister in law is still using a BellSouth email addy and they haven't been around here for many years. He said he had gotten a letter from HughesNet stating that they had until Nov 16th to save, move, forward, whatever, their Hughesnet emails because they would lose them after that date.
I have never heard of a company simply mass-deleting email accounts (the customer still has his HughesNet service). From what I understand, in the past, the company who was ditching their email service simply sold the customer base to a company like Google.
Anyone else getting this letter. He said he would show it to me tomorrow when I go out there and set up his internet.
I have never heard of a company simply mass-deleting email accounts (the customer still has his HughesNet service). From what I understand, in the past, the company who was ditching their email service simply sold the customer base to a company like Google.
Anyone else getting this letter. He said he would show it to me tomorrow when I go out there and set up his internet.
6 Replies
·
84 views
Still the same number of years, just more Sunsets…Wouldn't we then die of old age sooner?
Staff member
HERE TO HELP YOU!
Hard getting used to the new younger Gibbs, Mark Harmons son had the right look but I understand he didn't want the role.
Still I'm enjoying, pretty good job with Franks.
Still I'm enjoying, pretty good job with Franks.
62 Replies
·
4171 views
Mark Harmon is coming back as Gibbs in Origins, for the full season. Just saw, Dinozzo too, on NCIS . That will be an interesting writing project.
deadline.com
Mark Harmon Returning To 'NCIS: Origins' As Gibbs For Season 3
Mark Harmon is returning to NCIS: Origins for a season-long arc.
deadline.com
Staff member
HERE TO HELP YOU!
Cutting Edge
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!
So let the game continue!
The last song was added by Bobby who posted...
One Meat Ball - Andrews Sisters
CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!
Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game
Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.
Example:
Long Live Rock and Roll -- Rainbow
Rainbow in the Dark -- Dio
Another example:
Ride the Lightning -- Metallica
Lightning Strikes -- Ozzy Osbourne
Get it?
An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
So let the game continue!
The last song was added by Bobby who posted...
One Meat Ball - Andrews Sisters
CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!
Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game
Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.
Example:
Long Live Rock and Roll -- Rainbow
Rainbow in the Dark -- Dio
Another example:
Ride the Lightning -- Metallica
Lightning Strikes -- Ozzy Osbourne
Get it?
An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
68491 Replies
·
2670117 views
Anyone else watch this show? Any guesses as to what was in the box Gibbs gave to Abby that was on her desk? It look liked it was glowing.
I also heard that someone was leaving the show at the end of this season. Any guesses as to who thats going to be?
I also heard that someone was leaving the show at the end of this season. Any guesses as to who thats going to be?
2130 Replies
·
214631 views
Tony as the director.
Would you rather have LaRoche ???Tony as the director.
OTHER Mini Multiswitch
I just received 6 receiver 2 port mini Multiswitch and it work great, no external power need it, and you can connect 6 receiver instead of 4 on most Mini Multiswitches... If anyone is interested in where they can get one PM me....
3 Replies
·
53 views
Supporting Founder
Lifetime Supporter
This is a thread that will keep you apprised of 4K events that will be showing on Dish channel 540. Keep looking here for information.
As of today, 9-27-17, there are no scheduled events posted for the next 2 weeks. That is subject to change on a daily basis.
As of today, 9-27-17, there are no scheduled events posted for the next 2 weeks. That is subject to change on a daily basis.
761 Replies
·
166964 views
For some reason, the satelliteguys.us site is loading a lot slower than usual on both Chrome on my Asus laptop and Safari on my iPhone.
I'm also seeing longer appearances of the blue bar at the top and the "3 blue bars" loading symbol.
Is anyone else also having the same problem? Thanks in advance.
I'm also seeing longer appearances of the blue bar at the top and the "3 blue bars" loading symbol.
Is anyone else also having the same problem? Thanks in advance.
524 Replies
·
17847 views
I have been optimizing the site the past few days... and got us here now. 
We are rocking now!
We are rocking now!
Remember folks... just like DNS... its always Foxbat. 
WTF… …What the Foxbat!Remember folks... just like DNS... its always Foxbat.
Pub Member / Supporter
Lifetime Supporter
Can't help but wonder if a worker overlooked checking the harness. I rarely ride a roller coaster anymore but when I do I check the harness myself pretty aggressively.
Can't imagine what the son is going through.
www.dailymail.com
Can't imagine what the son is going through.
Dad levitated and bled then fell to his death from coaster
Eyewitnesses have shared fresh details of the horrific accident that happened at Six Flags Over Georgia on Monday afternoon.
22 Replies
·
182 views
Could B&M’s Patent on the “Clamshell” Ride Restraint Design Offer Clues as to What Happened on Goliath at Six Flags Over Georgia?
Incredibly sad news out of Six Flags Over Georgia as it’s being reported one man was killed after being ejected from Goliath, the B&M hyper coaster. Many news outlets have posted pictures of pe…
bgtsafari.com
Had no idea there were that many redundancies built into those restraints.Could B&M’s Patent on the “Clamshell” Ride Restraint Design Offer Clues as to What Happened on Goliath at Six Flags Over Georgia?
Incredibly sad news out of Six Flags Over Georgia as it’s being reported one man was killed after being ejected from Goliath, the B&M hyper coaster. Many news outlets have posted pictures of pe…
It makes sense, however, I would want more types of restraints, so if one doesn't work, the other does ... the restraints coming over the shoulder I would have expected ... with a Seat belt as last resort.
Fwiw, I inquired with what they use on Coasters at Cedar Point, various Coasters, different restraints according to what the car and track requires ...
NONE of the Coasters at CP use THAT particular system
I'm glad to see ...