Social Feed

Main Feed My Feed
C
CuriousInMichigan
Last reply · posted in Cable Television and Fiber Providers

Why would Spectrum cut ground wire?

Background: at the end of August I got AT&T 5G wireless home internet and discontinued all my Spectrum services

My single family home has a simple Spectrum install. There is a neighborhood line running underground along the street and Spectrum ran an underground line to my house. The Spectrum tech included a ground wire that connected to the main ground for my house. The main ground connection is outside on the side of my house and I just noticed the Spectrum ground wire has been cut.

Not being at all experienced with the install, I managed to get a self-described "indoor" Spectrum technician on the phone and was told this is common and not a safety problem of any kind.

Any reason why Spectrum would cut the ground wire they had installed? Thanks for any info!
Read more
39 Replies · 2163 views
Load Replies (39) Reply Legacy View
AZ.
AZ.
It may have been there to bleed off some voltage. You may have some high voltage close by? Transformer or switching box?
Read more
Reply
harshness
harshness
AZ. said:
It may have been there to bleed off some voltage. You may have some high voltage close by? Transformer or switching box?
Click to expand...
As I noted earlier, whenever a cable enters the home, its "ground" part must be earthed. The question remains as to why it was cut, given that the Spectrum cable is still connected.
Read more
Reply
  • Like
Reactions: FTA4PA
AZ.
AZ.
harshness said:
As I noted earlier, whenever a cable enters the home, its "ground" part must be earthed. The question remains as to why it was cut, given that the Spectrum cable is still connected.
Click to expand...
Im assuming its detached at the pedestal? But agree why didnt they keep the coax attached at the home? None of it adds up completely.
Read more
Reply
C
CuriousInMichigan
AZ. said:
Im assuming its detached at the pedestal? But agree why didnt they keep the coax attached at the home? None of it adds up completely.
Click to expand...
The pedestal has a lock on it so I can't check that.
Read more
Reply
AZ.
AZ.
CuriousInMichigan said:
The pedestal has a lock on it so I can't check that.
Click to expand...
I would expect it to be.
Read more
Reply
C
CuriousInMichigan
AZ. said:
I would expect it to be.
Click to expand...
I've asked my builder for help on this. My place is new construction and the builder is very good about advocating for new home owners. My area is not that large so I am hopeful the builder's electrician will be able to extract some info from someone they know personally at Spectrum. I will be sure to post any info I get from the builder. Thanks all for the discussion, it makes me determined not to just let this slide by.
Read more
Reply
  • Like
Reactions: FTA4PA and AZ.
C
CuriousInMichigan
CuriousInMichigan said:
I've asked my builder for help on this. My place is new construction and the builder is very good about advocating for new home owners. My area is not that large so I am hopeful the builder's electrician will be able to extract some info from someone they know personally at Spectrum. I will be sure to post any info I get from the builder. Thanks all for the discussion, it makes me determined not to just let this slide by.
Click to expand...

Heard back from my builder and their electrician. They tell me as long as I'm not using any Spectrum services the cut ground doesn't matter.

I'm going to take their advice. I want to thank everyone for their thoughts and wish all the very best in the upcoming holiday season!
Read more
Reply
harshness
harshness
CuriousInMichigan said:
They tell me as long as I'm not using any Spectrum services the cut ground doesn't matter.
Click to expand...
Practically (unless your area is subject to ground strikes), it probably doesn't make any difference.

That said, the current National Electrical Code (NEC 2023/NFPA 70) dictates that grounding is a building code requirement (where the NEC is incorporated in local codes -- as is commonplace).
NEC 820.93 said:
(A) Entering Buildings. In installations where the coaxial cable enters the building, the outer conductive shield shall be grounded in accordance with 820.100. The grounding shall be as close as possible to the point of entrance.
Click to expand...

The 2026 NEC, which is expected to be released soon, doesn't appear to amend that article.
Read more
Reply
  • Like
Reactions: CuriousInMichigan and Foxbat
C
CuriousInMichigan
harshness said:
Practically (unless your area is subject to ground strikes), it probably doesn't make any difference.

That said, the current National Electrical Code (NEC 2023/NFPA 70) dictates that grounding is a building code requirement (where the NEC is incorporated in local codes -- as is commonplace).


The 2026 NEC, which is expected to be released soon, doesn't appear to amend that article.
Click to expand...
Thank you very much for providing me with this info! I've changed my mind and will continue to look into the situation. It might be a while but I will get back with what I find out.
Read more
Reply
T
ts27330
Are you sure Spectrum cut the cable? Usually the new service provider cuts the line on their competition when they are new provider. Seen it many times.
Read more
Reply
Jimbo
Jimbo
ts27330 said:
Are you sure Spectrum cut the cable? Usually the new service provider cuts the line on their competition when they are new provider. Seen it many times.
Click to expand...
In my world, you didn't ever cut another service providers ANYTHING
Read more
Reply
View all replies (39)
dishstaller
dishstaller
Pub Member / Supporter Lifetime Supporter
Last reply · posted in Internet Television (IPTV) Discussion Forum

Hughesnet cancelling email addresses

Wasn't exactly sure where to post this. Just had a customer come in inquiring about internet. He has HughesNet and had heard good things about mine. He asked if we provided email addresses and it kinda caught me off guard. I said he should be able to keep whatever email he had been using....my sister in law is still using a BellSouth email addy and they haven't been around here for many years. He said he had gotten a letter from HughesNet stating that they had until Nov 16th to save, move, forward, whatever, their Hughesnet emails because they would lose them after that date.

I have never heard of a company simply mass-deleting email accounts (the customer still has his HughesNet service). From what I understand, in the past, the company who was ditching their email service simply sold the customer base to a company like Google.

Anyone else getting this letter. He said he would show it to me tomorrow when I go out there and set up his internet.
Read more
1 Replies · 37 views
Load Replies (1) Reply Legacy View
Foxbat
Foxbat
Doing a Google of the HughesNet Email notice, it seems that HughesNet has been trying to eliminate hosting emails since 2019. And with HughesNet filing Chapter 11 back in August, it would be a smart move to switch to a more stable Email provider. Even AT&T farmed out their Email to Yahoo! years ago.

SpaceX's Starlink and the Cellular 5G Home Internet solutions have pretty much relegated HughesNet and its high latency, low bandwidth Internet service to History. If Earth had shorter days, maybe a Geostationary Internet Solution might have stood a fighting chance…
Read more
Reply
TWiT Tech Podcast Network
· posted in TWiT Tech Podcast Network

Tech News Weekly 459

Time for another AWESOME video from the TWIT Network!


View: https://www.youtube.com/watch?v=CELCVXF_wXA


Direct YouTube Link - Tech News Weekly 459
TWIT's Website
TWIT Live Feed
Read more
0 Replies · 0 views
Replies Reply Legacy View
dishstaller
dishstaller
Pub Member / Supporter Lifetime Supporter
Last reply · posted in The Chit Chat Club

Man falls to his death on roller coaster at 6 Flags in GA

Can't help but wonder if a worker overlooked checking the harness. I rarely ride a roller coaster anymore but when I do I check the harness myself pretty aggressively.
Can't imagine what the son is going through.

www.dailymail.com

Dad levitated and bled then fell to his death from coaster

Eyewitnesses have shared fresh details of the horrific accident that happened at Six Flags Over Georgia on Monday afternoon.
www.dailymail.com www.dailymail.com
Read more
21 Replies · 160 views
Load Replies (21) Reply Legacy View
Jimbo
Jimbo
Back on the Goliath Roller Coaster ... I'm interested to find more details as well ...
Like where on the track did this happen (somewhere I read that it was on the climb up the top), which is impossible ...

They really need to take that ride and add at the very least, seatbelts ...

The Park is opening back up on Friday, the ride will Not be opening ... personally, I would keep it closed until different type of restraints can be designed and installed (over the winter).

I find it hard to believe that this ride is even allowed to be running with the restraints that exist at the moment, there are other rides that use the same type and they have been shut down across the country.

You got to believe that every ride has at least 2 types of restraint systems in place.

I wonder what and when we will hear from the Manufacturer ... and whatever governing bodies control these ...

Just think, this is a Major Amusement Park .... I would not have any problem getting on the Roller Coasters I have rode ...

Imagine what these County Fairs and others like them, I would not be caught Dead on one of them ... they get put up and tore down every other week, where is the safety for those rides ... No Thank You.
Read more
Reply
  • Like
Reactions: dishstaller
dishstaller
dishstaller
Jimbo said:
Imagine what these County Fairs and others like them, I would not be caught Dead on one of them ... they get put up and tore down every other week, where is the safety for those rides ... No Thank You.
Click to expand...
The first roller coaster I ever road was one of those. I was terrified but I was with my friends and didn't want to wuss out. While in line I kept looking at the guys running the ride.....few teeth, not that bright looking....I just KNEW my life was over.
Read more
Reply
  • Haha
Reactions: Jimbo
Jimbo
Jimbo
bgtsafari.com

Could B&M’s Patent on the “Clamshell” Ride Restraint Design Offer Clues as to What Happened on Goliath at Six Flags Over Georgia?

Incredibly sad news out of Six Flags Over Georgia as it’s being reported one man was killed after being ejected from Goliath, the B&M hyper coaster. Many news outlets have posted pictures of pe…
bgtsafari.com bgtsafari.com
Read more
Reply
navychop
navychop
Jimbo said:
I would not be caught Dead on one of them
Click to expand...

Yet IF you were on one, you might be caught dead.
Read more
Reply
dishstaller
dishstaller
Jimbo said:
bgtsafari.com

Could B&M’s Patent on the “Clamshell” Ride Restraint Design Offer Clues as to What Happened on Goliath at Six Flags Over Georgia?

Incredibly sad news out of Six Flags Over Georgia as it’s being reported one man was killed after being ejected from Goliath, the B&M hyper coaster. Many news outlets have posted pictures of pe…
bgtsafari.com bgtsafari.com
Click to expand...
Had no idea there were that many redundancies built into those restraints.
Read more
Reply
Jimbo
Jimbo
dishstaller said:
Had no idea there were that many redundancies built into those restraints.
Click to expand...
It makes sense, however, I would want more types of restraints, so if one doesn't work, the other does ... the restraints coming over the shoulder I would have expected ... with a Seat belt as last resort.

Fwiw, I inquired with what they use on Coasters at Cedar Point, various Coasters, different restraints according to what the car and track requires ...

NONE of the Coasters at CP use THAT particular system :)
I'm glad to see ...
Read more
Reply
View all replies (21)
TheRatPatrol
TheRatPatrol
Last reply · posted in TV Shows

NCIS

Anyone else watch this show? Any guesses as to what was in the box Gibbs gave to Abby that was on her desk? It look liked it was glowing.

I also heard that someone was leaving the show at the end of this season. Any guesses as to who thats going to be?
Read more
2129 Replies · 214615 views
Load Replies (2129) Reply Legacy View
TheRatPatrol
TheRatPatrol
Wait, Tony is the director now? Apologies, I stopped watching a while ago.
Read more
Reply
  • Wow
Reactions: Howard Simmons
Jimbo
Jimbo
TheRatPatrol said:
Wait, Tony is the director now? Apologies, I stopped watching a while ago.
Click to expand...
Was Gibbs still there when you quit watching ?
If so, A Lot has happened ....

It's been pretty good all along , once you get use to Gibbs being gone.
Read more
Reply
  • Like
Reactions: MikeD-C05
Jimbo
Jimbo
Jimbo
Jimbo said:

View: https://www.youtube.com/shorts/BIdMzUBHvjw?feature=share
Click to expand...

Howard ...
You don't like Tony, or Tony as the Director (he's only been there for 30 seconds now) or you don't like NCIS ?
Read more
Reply
  • Like
Reactions: Howard Simmons
Howard Simmons
Howard Simmons
Jimbo said:
Howard ...
You don't like Tony, or Tony as the Director (he's only been there for 30 seconds now) or you don't like NCIS ?
Click to expand...
Tony as the director.🙄
Read more
Reply
Jimbo
Jimbo
Howard Simmons said:
Tony as the director.🙄
Click to expand...
Would you rather have LaRoche ???
Read more
Reply
View all replies (2129)
iJustine
· posted in iJustine

Meet up in San Francisco! NVIDIA RTX Spark Meet & Greet 10/16!

Time for another AWESOME video from iJustine!


View: https://www.youtube.com/shorts/Qd-RuBfiRUM


Direct YouTube Link - Meet up in San Francisco! NVIDIA RTX Spark Meet & Greet 10/16!
The official iJustine Website's Website
Buy her book!
Read more
0 Replies · 3 views
Replies Reply Legacy View
TWiT Tech Podcast Network
· posted in TWiT Tech Podcast Network

Apple's New Smart Home Ecosystem

Time for another AWESOME video from the TWIT Network!


View: https://www.youtube.com/shorts/VzOS-cQ-WkM


Direct YouTube Link - Apple's New Smart Home Ecosystem
TWIT's Website
TWIT Live Feed
Read more
0 Replies · 2 views
Replies Reply Legacy View
H
Houston Rockets
Last reply · posted in FTA Receiver / Equipment Support

OTHER  Mini Multiswitch

I just received 6 receiver 2 port mini Multiswitch and it work great, no external power need it, and you can connect 6 receiver instead of 4 on most Mini Multiswitches... If anyone is interested in where they can get one PM me....
IMG_1786.webp
Read more
1 Replies · 34 views
Load Replies (1) Reply Legacy View
Titanium
Titanium
Have you tested using external power? Over the years, have found unpowered polarity switching to be unreliable. Especially problematic when used with DiSEqC motors or switch stacking.
Read more
Reply
dishstaller
dishstaller
Pub Member / Supporter Lifetime Supporter
Last reply · posted in The Chit Chat Club

4 ft LED tube bulbs now come with color selector

I bought the fixed color version of these bulbs for my store several years ago...work great and no more replacing ballast. Finally had one go out and when I went back to Amazon I saw that now they come in selectable versions so no more guess work as to what color light would do best in a certain area. They are now double OR single ended...used to be strictly one way or the other. If any of you are looking at replacing the old style 4 or 8 ft bulbs, you might want to give these a try. The 8 footers are BRIGHT. I put 5 in my shooting/target shed and you can get a decent tan if you are in there long enough.

Read more
1 Replies · 20 views
Load Replies (1) Reply Legacy View
  • Like
Reactions: Foxbat, navychop and comfortably_numb
Foxbat
Foxbat
When we re-lamped my in-Laws' house for sale last year, we were able to get all the Edison bulbs and a few fixtures with switch-selectable Color Temperature. We tried a few and settled on 3000°K as the best fit for the house. Matching the lighting in all the rooms made for an inviting experience. The Shop was the only place that we went with 4000°K for the LED 4' fixtures.

The house was sold within a month of going on the market, so we must have done something right.

The other advantage is if the new owners decide that they prefer a warmer light, they can unscrew the bulbs (I think it was close to 70 bulbs) and set them to the 2500K/2700K settings.

I'll have to check these out. Thanks!
Read more
Reply
TWiT Tech Podcast Network
· posted in TWiT Tech Podcast Network

When AI Agents Go Off Script with Spencer Thompson of Origin

Time for another AWESOME video from the TWIT Network!


View: https://www.youtube.com/watch?v=9bm9kDe9Q98


Direct YouTube Link - When AI Agents Go Off Script with Spencer Thompson of Origin
TWIT's Website
TWIT Live Feed
Read more
0 Replies · 4 views
Replies Reply Legacy View
Former member 209992
Former member 209992
Last reply · posted in SatelliteGuys Support Center

Site is slooooow

For some reason, the satelliteguys.us site is loading a lot slower than usual on both Chrome on my Asus laptop and Safari on my iPhone.
I'm also seeing longer appearances of the blue bar at the top and the "3 blue bars" loading symbol.
Is anyone else also having the same problem? Thanks in advance.
Read more
520 Replies · 17797 views
Load Replies (520) Reply Legacy View
  • Like
Reactions: charlesrshell
Scott Greczkowski
Scott Greczkowski
Just doing a big security update on the server, may slow down then again it may not. Just wanted to warn you guys. :D
Read more
Reply
  • Like
Reactions: Foxbat, long_time_Dish, Bobby and 3 others
Scott Greczkowski
Scott Greczkowski
Ok the update is complete. :)
Read more
Reply
  • Like
Reactions: long_time_Dish, worstman1, Bobby and 2 others
Foxbat
Foxbat
Scott, I was having major issues getting connected around noon ET. Looks fine now. I captured a Safari session that was showing high CPU utilization in the Rendering of the page, like 90+%. I have a JSON file I created that I could share.
Read more
Reply
  • Like
Reactions: charlesrshell
Scott Greczkowski
Scott Greczkowski
Been using the site at that time and saw no issues. A quick look at the logs shows nothing strange.
Read more
Reply
  • Like
Reactions: charlesrshell and Foxbat
Foxbat
Foxbat
Yeah. It's probably something going on with the MacBook as my iPhone has been pretty snappy.
Read more
Reply
  • Like
Reactions: charlesrshell
View all replies (520)
Load More
Top
Back