are these lnb's interchangeable? 18LNBR0-02 (LNB 18) and DTV32+

[sjmslik]

are these lnb's interchangeable? 18LNBR0-02 (LNB 18) and DTV32+
?

thanks

 

[dtro77]

I'm going to say no.

The 18 LNB is for Directv
The Aspen DTV32 is for Dish Network.

 

[sjmslik]

that is totally wrong, the dtv32+ is used on Directv dishes all the time. i have never seen a dtv32+ on a dish network system, i suppose it could be used on a legacy or fta, but generally it is for directv. Anyone else have an informed answer?

 

[dtro77]

that is totally wrong, the dtv32+ is used on Directv dishes all the time. i have never seen a dtv32+ on a dish network system, i suppose it could be used on a legacy or fta, but generally it is for directv. Anyone else have an informed answer?

From what I saw the DTV 32 works with Dish and Directv. So not really sure what your asking.
The 18 only works with Directv. So IMO that would not be interchangable.

 

[dtro77]

NEW EAGLE ASPEN KU-BAND LNBF DTV32+ DIRECTV DUAL OUTPUT 101 SATELLITE
​

THIS SALE IS FOR A BRAND NEW EAGLE ASPEN KU-BAND LNBF DTV32+ DIRECTV DUAL OUTPUT 101 SATELLITE ​

• This Lnbf compatibles with all FTA receivers such as: Pansat, CoolSat, MegaSat, LavaSat, Pantec, Fortec, Silver Bird, Black Bird , Nfusion, Viewsat, Sonicview and many other FTA receivers.
• This Lnbf works with all circular polarization ku band satellites. Great choice for Echostar 3 (Dishnetwork 61.5), Echostar 6/8 (Dishnetwork 110), Echostar 7 (Dishnetwork 119), Echostar 1/2 (Dishnetwork 148), All DirecTV, All Bell ExpressVu (NIMIQ) and other Circular Polarity satellites.
• It does not work with Galaxy, Amc , satmex or any other FTA satellite.
• WORKS ON LEGACY TECHNOLOGY FOR DISH NETWORK AND BELLVU RECEIVERS.
• it does not work with FTA dish antennas. it will no fit.
• it will fit mini dish antennas such 18" directv.

SPECIFICATIONS AND FEATURES:

• MODEL NUMBER DTV32+ ​
• I/P FREQUENCY 12.2-12.7 GHz ​
• O/P FREQUENCY 950-1450 MHz ​
• LO FREQUENCY 11.25 GHz ​
• LO INITIAL ACCURACY +- 1MHz@ 25 C ​
• STABILITY (-35 C To +52 C) +- 2.0 MHz ​
• LO Phase Noise <-50 dBc/Hz (@1kHz) / <-75 dBc/Hz(@10kHz <-95 dBc/Hz (@100kHz) / <-115 dBc/Hz (@1MHz) ​
• Noise Figure (-35°C to +52°C) 1.1 dB (max.) ​
• Crosspol Isolation 20 dB ​
• Conversion Gain (-35°C to +52°C) 50 dB - 62 dB Gain Variation ± 0.5 dB (max.)/24 MHz ± 2.5 dB (max.)/500 MHz​
• Image Rejection 40dB (min.) ​
• Third Order Intermodulation -50 dBc (min.) 1 dB ​
• Compression Point 0 dBm ​
• Polarization Selection RHCP 10.5 - 14.0 VDC LHCP 15.0 – 21 VDC ​
• Output Impedance 75 W, ​
• F-female Output VSWR 2.0 : 1 x.​
• DC Current 180 mA ​
• Output Ports 2 ​
• Tube Interface Type Square Tube ​
• Operation Temperature -35°C to +52°C ​
• [SIZE=+0]Throat Size 30 mm
  
  [/SIZE]​

 

[dtro77]

that is totally wrong, the dtv32+ is used on Directv dishes all the time. i have never seen a dtv32+ on a dish network system, i suppose it could be used on a legacy or fta, but generally it is for directv. Anyone else have an informed answer?

2 seconds of a google research by the way.

 

[dtro77]

I wouldn't expect to see many on a dish system, since Dish has their own LNBFs. Dish Pro and Dish Pro Plus, Legacy.

Not Aspen Eagle.

 

[dtro77]

the dtv32+ is used on Directv dishes all the time. ?

And thats Totally wrong.
Directv uses Phase III, Slim Line 3 and Slim Line 5 LNBF's Its not 1995 anymore.

 

[sjmslik]

how does that answer my question to whether those lnb's are interchangable?

 

[dtro77]

how does that answer my question to whether those lnb's are interchangable?

What are you interchanging.

A 18 with a 32. Yes if its Directv
A 32 with a 18 Not if its Dishnetwork
Can you remove them from a 18 Inch round dish and replace them if they are defective . YES
That about cover it for you.

 

[Mr Tony]

a simple google search would find your answer

They are pretty much the same and will work on a single LNB setup (101)

 

[dtro77]

a simple google search would find your answer

They are pretty much the same and will work on a single LNB setup (101)

Yes for Directv, But from what I saw the 18 won't work with Dishnetwork.
Since he already knew the 32 works with Directv all the time, why would he even ask about Directv?

 

[Mr Tony]

The 18 is a dual LNB that would work for Dish in a legacy setup

When I got dish for like 6 months (long story) I used a Directv ghetto rigged setup
Took an old Phase II (that has separate LNB's) and used that for 110 & 119 combined with a SW21

Legacy LNB's will work on either system. Dishpro LNB's wont work with Directv. Obviously the LNB's that are "clustered" together with an internal switch are not interchangable

 

[dtro77]

The 18 is a dual LNB that would work for Dish in a legacy setup

Which is why I'm guessing they don't list it as working with Dish Network .

 

[Mr Tony]

but it will work with Dish....its just grossly outdated

 

[dtro77]

but it will work with Dish....its just grossly outdated

Maybe if the OP would have giving maybe a hint on what the application was, instead of a half a sentence. Cause the answer is not a Cut and dry Yes or a No with the Dish equipment.
One can only assume he is using it for Directv 101.

 

[KE4EST]

Yes they will interchange if you are using a dish just point at 101...you will be ok