Ariza 700

[bobsav2001]

I have 3 Ariza 700 that have been modified for D**H and B*V.
I would like to bring them back to their original software like
when we buy them brand new as fta receiver.
Anyone can tell me where to get that software?
Thanks Bob....

 

[Anole]

If I were trying to restore them and there is no factory web site, I would use Google and search on: "factory firmware Ariza 700".
You'll get a list of hacker sites.
They often have original factory firmware listed along with their "upgrades".
I found one posted late 2005.

If the receiver has been "converted" to some model Pansat or Fortec clone, that may be a bit harder to unravel.

There is another potential problem.
Sometimes the factory firmware has bugs, and they are only cured in the hack-ware.
Restoring factory 1.0 might leave you a receiver with poor blind scanning, poor switch control, and no motor capability.
Not for sure, just speculation. But, be on the lookout for such problems.

 

[Mr Tony]

Looks like a hacker site has somewhat of a factory firmware...looks like its a 2 part process...the 3rd part must be old hackerware

as with all software, you are on your own in regards to loading and any issues

 

[bobsav2001]

Thanks evreyone,but my Ariza is still genuine Ariza not Newphase or Pariza.
The 2mo software is Ariza but the bin file is the old 293, at 897 Ko.
I will try to modify one to newphase.
Thanks again Bob....