Auto off issue. HDMI

  • DIRECTV'S SATELLITE D11 at 99 DEGREES IS COMING BACK TO LIFE!

    After 24 hours of being down the DIRECTV 11 Satellite is beginning to show signs of life again! Looks like this ordeal will soon be over! DIRECTV thanks you for your patience!!

    For more details and updates as they happen from our CUTTING EDGE team please CLICK HERE

    CLICK THE X IN THE TOP RIGHT CORNER OF THE BOX TO DISMISS THIS MESSAGE

budda

SatelliteGuys Pro
Original poster
Mar 21, 2006
596
100
Oconomowoc
I have a Denon AVR-X3400H. Samsung KS8500 65" TV. And the Hopper 3. All three have HDMI control on. Up until the last few weeks. If I turned off any of the 3. All three would turn off. Now The Denon stays on only the other two shut down. Not the end of the world but kinda sucks. Any suggestions. Thanks
 
Is your Denon have internet connection? It may have updated the firmware. In any case I remember when I first set my system up (I have a Yamaha), when I turned off the Yamaha and the Samsung TV was on, the TV went into a sleep state. It was on but had a black screen. I set the Yamaha not to power off anything when it was turned off. So in my case, I know such settings are controllable. Don't know if I'm in any help :)

Sent from my SM-G920V using Tapatalk
 
Thanks did a reset on all devices. Checked firm ware. Current but nothing too recent. Thanks for all suggestions.
 
***

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Who Read This Thread (Total Members: 1)