Connecting HDD200 remotly

[jimbcac]

Hi.. Am not the most tech sophisticated dude. Have a 8' BUD running
into a dsr922, A TV in the living room connected to the DSR 922
with a 50' bit of coax going to my bedroom for a TV there..Ok Now I
have a HDD200 I wanna hook up the bedroom set. Can I..only connection
going to bedroom is the coax out of the back of the DSR922. Obviously
I will need some sort of interface between the coax and the hdd200.
I have tried running the coax into a vcr, then using the analog audio and composite video from the vcr to the hdd200. Then went with the YPbPr from
the hdd into my Pioneer Elite HD TV...
This does not seem to work.
Can I somehow make it work, or do I have to go straight from the back of
the DSR922 into the HDD200? THis will mean I can not watch HD tv in my
bedroom..

 

[eurosport]

Can I somehow make it work, or do I have to go straight from the back of
the DSR922 into the HDD200?

Yes, the HDD-200 needs to connect directly to the DSR-922. Then the output of the HDD-200 goes to the HDTV.

 

[jimbcac]

Ah,, not what I wanted to hear, but after thinking about it it does make sense...

thanks very much

jim in gold bar