I need help configuring the Coolsat 6000 to work with the QPH-031 LNB. My setup is as follows
QPH-031 1 Circular output to the LNB1 input of the DiSEqC switch and 1 Linear output of the LNB to the LNB2 input of the DiSEqC switch. The output of the switch to the LNB input of the SG-2100 motor and the output of the moter to the LNB input of the Receiver. I think it is connected properly. My question is, where do I get information on the configuration of the Coolsat/QPH-031/DiSEqC setup. Which type of LNB do I select on each satellite and which port on the DiSEqC switch do I select for each satellite? my location is zip code 60014.
QPH-031 1 Circular output to the LNB1 input of the DiSEqC switch and 1 Linear output of the LNB to the LNB2 input of the DiSEqC switch. The output of the switch to the LNB input of the SG-2100 motor and the output of the moter to the LNB input of the Receiver. I think it is connected properly. My question is, where do I get information on the configuration of the Coolsat/QPH-031/DiSEqC setup. Which type of LNB do I select on each satellite and which port on the DiSEqC switch do I select for each satellite? my location is zip code 60014.