Hey guys, I have a simple question. I want to install a 3x4 multi switch fron dual lnb. Is there anything I need to change in the receiver settings after I put up the switch? Also should I scan it directly connected to the LNB or connected thru the switch? Does it matter?
Coolsat 6000 with multiswitch
- Thread starter godfather818
- Start date
- Latest activity Latest activity:
- Replies 2
- Views 959
-
WELCOME TO THE NEW SERVER!
If you are seeing this you are on our new server WELCOME HOME!
While the new server is online Scott is still working on the backend including the cachine. But the site is usable while the work is being completes!
Thank you for your patience and again WELCOME HOME!
CLICK THE X IN THE TOP RIGHT CORNER OF THE BOX TO DISMISS THIS MESSAGE
- Status
That switch is as simple as hooking up both ports on the LNB to the 18V and 13V ports, and then hook your receiver to one of the four outputs. You're done. 
yeah thats pretty much it. No settings need to be changed on the receiver. Its just like you had a line from the LNB to the receiver
The multisiwtch allows you to have 4 boxes on a dual LNB.
The multisiwtch allows you to have 4 boxes on a dual LNB.
- Status
Similar threads
