DVR 622 Configuration

[steve617]

I am getting a 622 DVR next on the 28th and I was just wondering what would be my best way to hook everything up. I currently have 3 TV's and 2 recievers. The 2 bedroom TV's run on the same satellite which is a older Legacy 4000 system. ( I Think) My main TV were the DVR will be going currently has a HD-211. It suppose to be a lease at least I am paying a $5.99 lease fee. I assume I suppose to send it back. I don't have a landline so I plan on running a cat5 cable from the ethernet port on the 622 to my Network.

Now my big question does the 622 have 2 tuners that could operate one of the bedroom TV's and my main TV. If so I could leave the older legacy reciever hooked up to the TV that it is on.

My current fees are the regular fee for the top 250 and the leased reciever fee of $6 and my $20 HD fee.

Thanks for any advice. I just want to have my cat5 right when the come and do the install.

 

[mike2154]

Yes the 622 will support HD on tuner 1 and SD 480i on tuner 2.

 

[KE4EST]

Yes the 622 will support and be able to feed SD to your other TV.

 

[Jim5506]

622 supports SD on both output1 and output2.

Output1 is primarily for HD, output2 is SD only.

All three tuners are HD.

OTA tuner (#3) is not directly addressable from output2.