Instead of fooling around with extra dishes, switches, diseqcs, multiple LNBs, etc, I decided to invest on an SG 2100 motor on ebay.
I just got it and read the instructions.
These instructions tell you how to mount the dish, but are not very clear about how to set the correct angle.
The instructions say to locate my true south (G10R) and to look at the table in the booklet for the correct elevation and declination. This is where I get lost. My latitude is 49.
My dish is currently set to about 33 degrees , but if I use the table, it tells me to use:
Elevation: 41
Declination: 7.2
Dish Bracket angle: 22.9
It also tells me to set the dish elevation to 30-declination angle.
How does this all add up?
What do I set the mounting bracket elevation to? and also what do I set the dish elevation to?
Thanks,
I just got it and read the instructions.
These instructions tell you how to mount the dish, but are not very clear about how to set the correct angle.
The instructions say to locate my true south (G10R) and to look at the table in the booklet for the correct elevation and declination. This is where I get lost. My latitude is 49.
My dish is currently set to about 33 degrees , but if I use the table, it tells me to use:
Elevation: 41
Declination: 7.2
Dish Bracket angle: 22.9
It also tells me to set the dish elevation to 30-declination angle.
How does this all add up?
What do I set the mounting bracket elevation to? and also what do I set the dish elevation to?
Thanks,