help twinhan 102g

Status
Please reply by conversation.

gitch

Member
Original poster
Oct 23, 2005
7
0
I just purchased a twinhanpci 102g card and have scanned with no luck. I have a signal strength 0f 40. I have a old DSS dish with lnb and also a dish 500 with lnb. I have no idea what i can pick up. I live near windsor, Ontario Canada if that helps.

Thanks, any help would be appreciated.
 
pointed at 91w what sats can i get

i have my dish 500 pointed at 91w tried galaxy 11 scanned and nothing not even radio i believe it is my settings. i have a twinhan 102g. is there any better software out there. right now i have prog dvb and my theatre.
 
Dish 500 will not work for FTA if it uses a switch (some in built). If there is no switch and its not a Dish Pro LNB it can be used as a single dish pointing at any of the above satellites for the LEGAL FTA channels.
 
okay 12223 is the freq i would enter to get the bell express preview channel for 91w right. do i enter this into the lnb freq or the transponder freq
 
Transponder.

If its a regular DBS LNB then the L.O. should be 11250

Moved thread to the PC DVB area.......
 
ok. i will try both dishs just in case the dish 500 has a switch built in like you said it may not work.

so i can use my old dss dish and lnb if needed.

i have it pointed to 91 west right now.

i believe lyngsat sais i pick galaxy 11?

I am using Prog DVB.
Quality is zero and level is 34% and the next part is my prob, the settings.

LNB - gives me a bunch i pick galaxy 11 as per lyngsat?
Transponder -- 12509-v-6283 ?? i dont know which one gives me about 100 to pick from
then
freq?? polarisation?? and symbol rate??
thanks, i know i should figure this out myself but its been three days i am confused more than ever
 
Stacked dish 500 Digital LNBF will it work on FTA twinhan 102g

I have a stacked dish 500 and it sais Digital LNBF on the LNB will this work or does it have a built in switch? And therefore not compatiable with FTA. if so my lnb of my rca dss system sais DSS digital satellite system i believe it should work with my twinhanDTV 102 g card?
Any ideas
 
110w with twinhan

could someone help with settings i am using a rca dss dish and lnb. i have tried to understand lyngsat but do not get any channels. i do i need to use twinhan software or can i use progdvb?? i can never get the settings proper. i am pointed 110w get someone share there settings if they own a twinhan card or have used progdvb please.
 
I PM'd the OP and he has ASSURED me he is just trying to get his new card working on ANY satellite with the antenna he has at hand. Re-opening.....

--------------------------------------------------------------------------------

"Just to make it clear i just bought this card from ebay and my uncle has a motel with one of those huge dish's. I would like to make sure the card works because he previously said he would like to sell the dish because he is getting a new one. So i just need help because i have scanned with no luck. I hope this card is not defective it was sealed."
 
The twinhan software sucks, and I've never used progdvb. Download ritzdvb (free) or MyTheatre (free with 1 hour limit until you buy it).

For ritzdvb, make a new text file in the transponders folder, and copy the following into it:

Code:
[SATTYPE] 
1=1100 
2=Echostar 6,8 
[DVB] 
0=32 
1=12224000,V,20000000 
2=12239000,H,20000000 
3=12253000,V,20000000 
4=12268000,H,20000000 
5=12282000,V,20000000 
6=12297000,H,20000000 
7=12311000,V,20000000 
8=12326000,H,20000000 
9=12341000,V,20000000 
10=12355000,H,20000000 
11=12370000,V,20000000 
12=12384000,H,20000000 
13=12399000,V,20000000 
14=12414000,H,20000000 
15=12428000,V,20000000 
16=12443000,H,20000000 
17=12457000,V,20000000 
18=12472000,H,20000000 
19=12486000,V,20000000 
20=12501000,H,20000000 
21=12516000,V,20000000 
22=12530000,H,20000000 
23=12545000,V,20000000 
24=12559000,H,20000000 
25=12574000,V,20000000 
26=12588000,H,20000000 
27=12603000,V,20000000 
28=12618000,H,20000000 
29=12632000,V,20000000 
30=12647000,H,20000000 
31=12661000,V,20000000 
32=12676000,H,20000000 
[LNB] 
LOF1=11250000 
LOF2=11250000 
LOFSW=0 
DiSEqC=NO 
DiSEqCType=0

If that doesn't work, then you have a dishpro lnb which bandstacks, so copy this instead:

Code:
[SATTYPE] 
1=1100 
2=DP500-Echostar 6,8 
[DVB] 
0=32 
1=12224000,V,20000000 
2=13361000,V,20000000 
3=12253000,V,20000000 
4=13332000,V,20000000 
5=12282000,V,20000000 
6=13303000,V,20000000 
7=12311000,V,20000000 
8=13274000,V,20000000 
9=12341000,V,20000000 
10=13245000,V,20000000 
11=12370000,V,20000000 
12=13216000,V,20000000 
13=12399000,V,20000000 
14=13186000,V,20000000 
15=12428000,V,20000000 
16=13157000,V,20000000 
17=12457000,V,20000000 
18=13128000,V,20000000 
19=12486000,V,20000000 
20=13099000,V,20000000 
21=12516000,V,20000000 
22=13070000,V,20000000 
23=12545000,V,20000000 
24=13041000,V,20000000 
25=12574000,V,20000000 
26=13012000,V,20000000 
27=12603000,V,20000000 
28=12982000,V,20000000 
29=12632000,V,20000000 
30=12953000,V,20000000 
31=12661000,V,20000000 
32=12924000,V,20000000 
[LNB] 
LOF1=11250000 
LOF2=11250000 
LOFSW=0 
DiSEqC=NO 
DiSEqCType=0

I stole these from the ritzdvb website. They have other ini files for other FTA birds once you get your setup working. Of course you'll need a bigger dish and linear lnb!
 
ritz dvb

thanks could you give the ini files for ritz dvb for a rca dss lnb please i am trying that lnb because it is not stacked and i am pretty sure i will have less probs
thanks
 
Status
Please reply by conversation.

Losing 1.2 setting

Do I want a FTA receiver?

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Who Read This Thread (Total Members: 1)