Hopper H3 Software version H708 out

[Almighty1]

Hopper H3 Software version H708 out

Downloaded and installed, no changes seen yet.

 

[tsunami2311]

So I dont know if this update that cause but both my box are new give me Port 3 Generic Warning I dont that referring to the satellite 72/62.5/x/x as ports which would be the 3rd of x which always and that has always show x in last 2 or if it talking about DP switch port 3 and 4 arnt even used they have those caps still on them. only ports 1 and 2 are used and wired on switch.

 

[bookworm370]

So I dont know if this update that cause but both my box are new give me Port 3 Generic Warning I dont that referring to the satellite 72/62.5/x/x as ports which would be the 3rd of x which always and that has always show x in last 2 or if it talking about DP switch port 3 and 4 arnt even used they have those caps still on them. only ports 1 and 2 are used and wired on switch.

I get the exact same error. No noticeable effects, but it won't pass the self-test.

 

[rocatman]

I get the exact same error. No noticeable effects, but it won't pass the self-test.

Same here on my H3 with the Port 3 warning with 72/62.5/x.

 

[tsunami2311]

I get the exact same error. No noticeable effects, but it won't pass the self-test.

I hear it has something to do receiver was connected to satalite that is no long used?

61.5 and 72 are used now I could swore 110 was thing so was 119 I know the receivers was connect to atlest one those at one point, have no idea when they was switch over, been atlest 6 years since that "dish" alignment