Absolutely not. just trying to bring unit back to life. No front display, no video out either ntsc or pal (use old black/white tv with vertical hold adjust to view pal mode). I see there is no one here that can help. MODS please close this thread.
Someone may be able to help. If you can still access it from the RS232 port, then it may be just that you loaded the wrong firmware and may be able to fix it by loading the correct firmware. As Jorgek said above, there's a lot of S10 and S9 clones out there and if you got one of those firmwares by mistake, that might be the problem. Or, if your box is a clone itself and you loaded real S10 firmware, that could be too.
Probably post what ver. firmware you loaded and a few pictures of the box itself so everyone knows what it is exactly and then someone might be able to help. With S10 and 9 it's not a cut and dry thing because of all the clones, some of them look just like the real deal.
I take it that it came on before this firmware update and you didn't back up the old firmware? Do you know what ver. the old firmware was?
$boatman! The Amiko Mini HD SE and GEOSATpro MicroHD are probably the most recommended. You also might want to check out the Amiko A3 - it's Android based, runs apps, has many features and is very advanced from the reviews I've read. There are authorized sellers for these right here on the forum. Are you looking to set up KU, C or both? Motorized?
