I have:
12 feet BUD
Fortec Ultra Mercury 2 Receiver
Visat Receiver
2 DMS 621 LNB (Only C-Band)
I am not new at installing dishes, but this one I dont know what I am doing wrong.
When I Scan from either receiver or using any of the 2 receiver I only get Vertical TP. During the Blind scan the receiver will show the same TP in Horizontal. So it is like the diode is not moving inside the LNB. But the 2 LNBs I have do the same. I was able by manually moving the LNB around to finally get the Horizontal, but then I get the same problem with the Vertical.
So... This LNB has markes for 0, 60, 90 degrees, so I set the LNB such a way that the vertical line showing 0 degress will be vertical to the ground when I set the Dish to the True South. Aligment is good, the BUD moves from Sat to Sat with no problem.
Any help or ideas are welcome.
12 feet BUD
Fortec Ultra Mercury 2 Receiver
Visat Receiver
2 DMS 621 LNB (Only C-Band)
I am not new at installing dishes, but this one I dont know what I am doing wrong.
When I Scan from either receiver or using any of the 2 receiver I only get Vertical TP. During the Blind scan the receiver will show the same TP in Horizontal. So it is like the diode is not moving inside the LNB. But the 2 LNBs I have do the same. I was able by manually moving the LNB around to finally get the Horizontal, but then I get the same problem with the Vertical.
So... This LNB has markes for 0, 60, 90 degrees, so I set the LNB such a way that the vertical line showing 0 degress will be vertical to the ground when I set the Dish to the True South. Aligment is good, the BUD moves from Sat to Sat with no problem.
Any help or ideas are welcome.