This is a mobile optimized page that loads fast, if you want to load the real page, click this text.

LNBF information

Status
Please reply by conversation.
change to SIngle (not universal) and LO of 10750

I use a satandard with no issues on my Coolsat 5000
 
Hi Iceberg,

Neither Single 10750 nor Universal 9750/10600 are working :-(. The ONLY option is UNIVERSAL 9750/10750 (How come Universal uses 10750?). Very strange. It only happens on AMC4. Tha't s why I asked for your opinion.

Cuong
 
Last edited:
I cant take a screen shot right now of AMC4 since I'm recording something on G10 but all of my KU Band satellites are set up for Single 10750 22k off
 
When its ON it sends a 22KHz tone to the LNBF or switch.

When its off it does not, a universal LNBF uses a 22KHz tone to switch from low to high band, 22KHz switch also use this tone!
 
well I have 2 universals should I have the 22Khz on.I'm running a 4x1 diseqc switch also
 
YES! The 22KHz tone is needed for the Universal LNB's and does not affect DiSEqC switch (It would mess up if you were using a 22KHz switch)
 
Status
Please reply by conversation.

Similar threads

I
LNBF problem
Replies
14
Views
2K
cyberham
Titanium LNBF Problem
Replies
12
Views
2K
C-BAND Satellite Discussion
LocutusOfBorg
Testing the new Titanium C138 Performance Plus C Band LNBF
Replies
63
Views
11K
C-BAND Satellite Discussion
Titanium
B
Edision SL-2 LNBF - review
Replies
17
Views
3K
FTA Equipment Reviews
Bassplayer 1964
Put a KU lnbf on my 8' SOLID Cband Dish
Replies
27
Views
4K
C-BAND Satellite Discussion
flody1
Menu
Log in
Register