In a previous thread what receivers work best with LPB all 3 of mine can seem to get it in. I am using amiko mini hd, nano and Micro Hd.
LPB Receivers
- Thread starter danristheman
- Start date
- Latest activity Latest activity:
- Replies 12
- Views 1K
- Status
Can, or can't? My Mini HD SE gets it, but it's weak. Some drop outs. IIRR a bump E or W sometimes helps. Pretty sure the Openbox S9 also got it. (Ku dish on lip of BUD)
Can't get it all today with the 35mph winds with 50+mph gusts. Dishes bouncing around too much. A lot of topsoil is moving north.
(Two farmers out looking at the fields. Farmer one;"there goes all my topsoil". Farmer 2:"yeah, but here comes mine")
Sounds like the winds aren't going to let up anytime soon. Other than the natural evening moderation.
Can't get it all today with the 35mph winds with 50+mph gusts. Dishes bouncing around too much. A lot of topsoil is moving north.
(Two farmers out looking at the fields. Farmer one;"there goes all my topsoil". Farmer 2:"yeah, but here comes mine")
Sounds like the winds aren't going to let up anytime soon. Other than the natural evening moderation.
I've never had a problem with a receiver decoding LPBS. It's always been a problematic signal though.
A week or so ago in testing with an 84e dish connected directly to an Amiko Mini HD, I had no issues. I later tore the dish down and erected another 84e dish and tested multiple dishes switched through various DiSeqC 1.0/1.1 switches. I could not get a lock on LPBS then, even when directly connected.
What are the sensitivity limits on signal frequency and SR deviations when trying to get a lock?
Receivers I've had success with:
Geosatpro Micro HD and HDVR1200
Amiko A3 and Mini HD
Azbox Premium HD+
Prof8000 PCI card.
Sent from a phone, probably while I'm driving over the speed limit through a school zone with construction workers present.
A week or so ago in testing with an 84e dish connected directly to an Amiko Mini HD, I had no issues. I later tore the dish down and erected another 84e dish and tested multiple dishes switched through various DiSeqC 1.0/1.1 switches. I could not get a lock on LPBS then, even when directly connected.
What are the sensitivity limits on signal frequency and SR deviations when trying to get a lock?
Receivers I've had success with:
Geosatpro Micro HD and HDVR1200
Amiko A3 and Mini HD
Azbox Premium HD+
Prof8000 PCI card.
Sent from a phone, probably while I'm driving over the speed limit through a school zone with construction workers present.
I just have to go off topic and say you have the most interesting user name.
I just have to go off topic and say you have the most interesting user name.
Probably heats his home with natural gas or propane. I'll have to keep trying to get LPB back but it gets aggravating.
In this pic, I'm running the Amiko A3 through an 8x1 diseqc on an 84e dish.
Flipped dish on po' man's polar mount
Sent from a phone, probably while I'm driving over the speed limit through a school zone with construction workers present.
Flipped dish on po' man's polar mount
Sent from a phone, probably while I'm driving over the speed limit through a school zone with construction workers present.
Since his username is 'woodheat' I would assume he has a wood burning stove
Thats how we heated the old lake house
- Status
