Ok i'm having a tough time of it. Not much of a clue how to get the pointing started.
I'm in Wilkes barre Scranton are of PA so my setup is
scale on motor clamp= 41.4
antenna elavation=24
true south sat i think is sbs6(74.0degrees) since my lat is 75.6
and my compass south is 187 although i think it might be more like 185 from
PBS"S FAQ page.
I have a 36' dish and a pm900 motor with a pansat2500a. i think i have everything up ok just no signal yet. my logic is there should be a nuber for the motor arm(east /west) and then zero in on the 187to get a signal. I guess i'll have to make sure i have the sat in my reciever when searching for it. Thanks For any help guys. thanks for moving thread iceberg, MAC
I'm in Wilkes barre Scranton are of PA so my setup is
scale on motor clamp= 41.4
antenna elavation=24
true south sat i think is sbs6(74.0degrees) since my lat is 75.6
and my compass south is 187 although i think it might be more like 185 from
PBS"S FAQ page.
I have a 36' dish and a pm900 motor with a pansat2500a. i think i have everything up ok just no signal yet. my logic is there should be a nuber for the motor arm(east /west) and then zero in on the 187to get a signal. I guess i'll have to make sure i have the sat in my reciever when searching for it. Thanks For any help guys. thanks for moving thread iceberg, MAC
