New 0.9.5303 fiwmware
- Thread starter pwrsurge
- Start date
- Latest activity Latest activity:
- Replies 31
- Views 7K
Just updated AZBOX Elite to Ver 0.9.5303 from 0.9.5020! I'm happy to report that I can now record and playback NBC high bit rate feeds from AMC 1 @ 103.0°W using my Seagate Free Agent 500GB "external USB HDD"Now to test streaming later!
Update: For some unknown reason Video recorded on PBS Feed "12096 V, 4340SR, Telairity Enconded" on G 14 & AMC 21 at 125.0°W plays for a quick second then stops and then goes back to showing live TV. This is not a knew phenomenon for me, but I was thinking the 5303 update should have fixed it. Can anyone with a dish on 125.0°W with an AZBox Elite try and record, played video from that transponder and tell us what issues if any that they experience?
Just did a 2 minute recording of "Telarity Encoded" on 125 on my AZBox Ultra and it recorded/played back without any problem.
An old bug has re-surfaced with 5303 (one that I had previously reported with 5209, and had been later fixed) where if you re-name a channel it screws things up (copied from my 5209 bug report to AZBox forum): "If you re-name a channel, the following occurs: The channel cannot be re-named again (the second re-name will only hold until you scroll up/down the channel list past the channel, or exit the channel list).
After re-name, the information always at the bottom of the channel list (satellite/transponder/etc.) no longer appears.
When viewing the re-named channel, if you then go to the channel list, the list shows from the beginning of the channel list, instead of from where the channel is in the list.
Re-named channel cannot be deleted from the Favourites list (it does initially, but re-appears when you scroll up/down the channel list past the channel, or exit the channel list)."
5303 NEW INFO: Have found an easy workaround (which will also recover any channels named though the channel list that are screwed up): Rename channels ONLY through Advance Scan & PID Edit.
I will definitely keep 5303, due to its recording of channels that 5020 could not do.
After re-name, the information always at the bottom of the channel list (satellite/transponder/etc.) no longer appears.
When viewing the re-named channel, if you then go to the channel list, the list shows from the beginning of the channel list, instead of from where the channel is in the list.
Re-named channel cannot be deleted from the Favourites list (it does initially, but re-appears when you scroll up/down the channel list past the channel, or exit the channel list)."
5303 NEW INFO: Have found an easy workaround (which will also recover any channels named though the channel list that are screwed up): Rename channels ONLY through Advance Scan & PID Edit.
I will definitely keep 5303, due to its recording of channels that 5020 could not do.
What i usually do is just turn off the v-box when i do blindscan. The BlindScan in these boxes are so slow i don't use them anyways.
Telairity Encoded at 125.0°W is now recording and playing back fine and this is on my external USB HD!!!
not here 
records but when I play it back it plays 2 or 3 seconds then goes back to the list of programs
records but when I play it back it plays 2 or 3 seconds then goes back to the list of programs
That was happening to me on Telairity Encoded on Tp 12096 V 4340SR, @125.0°W and I thought that was unique to my AZBox Elite. But After the upgrade to Ver. 5303, it happened one or twice. For some reason, the next day it began to record and play back normally. Maybe you should delete that transponder and re-add it, then scan for the channel and record and test playback.not here
records but when I play it back it plays 2 or 3 seconds then goes back to the list of programs
I have always had this issue with my Azbox Premium Plus. I have also always thought it is my motor or pole mounting playing around.
Similar threads
Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)
Who Read This Thread (Total Members: 1)
Latest posts
-
-
T
-
T
-
