This is a mobile optimized page that loads fast, if you want to load the real page, click this text.

Option to give motor time to move on CS5000

Status
Please reply by conversation.
I'd rather have it than not, if you are only blind scanning one satellite, start the scan, when you get the pause, stop the scan, then immediately start it again, no pause the second time. I'm not sure if that is the case with 1.01, give it a try, it might work.
 
Anole said:
If you weren't right there watching it.... if you were having a chat with the kids, or petting the dog, you wouldn't even notice those 15 seconds...
Quit watching the kettle!
Click to expand...

I only said 15 seconds because I wasn't really watching it but it was taking a while. After watching it, it takes about 45 seconds to a minute.
 

That's what I'm gonna do, now. Was hoping to select all the sats and walk away and come back after a trip to the can and it would be done.
 
cracklincrotch said:
That's what I'm gonna do, now. Was hoping to select all the sats and walk away and come back after a trip to the can and it would be done.
Click to expand...

Yes, I select 5 or 6 satellites for blind scan, hit scan and just leave it for 20 minutes or so and come back later to check whats up. If I watch it, it seems to take longer.
 
Status
Please reply by conversation.

Similar threads

M
New Motor!
Replies
27
Views
3K
comfortably_numb
new to Edision
Replies
12
Views
807
cyberham
Edision USALS motor
Replies
15
Views
749
FTA Receiver / Equipment Support
FTA4PA
J
Unable to pickup 101w
Replies
65
Views
3K
joshua18
J
S
OTHER Adding Motor
Replies
1
Views
426
FTA Receiver / Equipment Support
Titanium
Menu
Log in
Register