Phoenix AZ. installation!

  • WELCOME TO THE NEW SERVER!

    If you are seeing this you are on our new server WELCOME HOME!

    While the new server is online Scott is still working on the backend including the cachine. But the site is usable while the work is being completes!

    Thank you for your patience and again WELCOME HOME!

    CLICK THE X IN THE TOP RIGHT CORNER OF THE BOX TO DISMISS THIS MESSAGE
Status
Please reply by conversation.

trukker

New Member
Original poster
Apr 13, 2006
1
0
put up a Global Star System 300 w/ 80cm dish at my sisters house (while on vacation, i live in delaware) but was unable to aim it.
would like to find an installer in the phoenix area to aim the dish at the Galaxy 10-R satellite plus install a motor at a later date?
 
Moved to the MAIN FTA area.

WELCOME to the SatelliteGuys.US FTA forum!

You are the 2nd member in the last week looking for an installer in this area!

Maybe time for a trip to AZ. (joke)

Good luck! (Guess you have tried the local Yellow Pages)
 
Let's see, 10am in PHX and up to 101.... better wait until December for that trip. (jk)
 
WTguy said:
Let's see, 10am in PHX and up to 101.... better wait until December for that trip. (jk)

Yep about 2º warmer than here the last few days!
 
g-10 in PHX

G 10 is had to find in phx unless you know what channel/ TP is strong. Tp 11805 is what I try to find ( UW tv)
 
g-10

The 80cm might be to small. On my 32 I would get maybe 30 for quality on the lower tp and maybe 50 on the higher tp. My 36 inch fortec does around 50 and 85 for the higher tp's
 
Status
Please reply by conversation.

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Who Read This Thread (Total Members: 1)