Primestar Dish on SG2100 ?
- Thread starter PipeDream
- Start date
- Latest activity Latest activity:
- Replies 145
- Views 38K
- Status
Here's my receiver settings I set up:
(I have a Satpros DSR 500 receiver, using a universal .3 SNH 031 LNBF)
LNB SETUP:
LNB type: Universal but left the HIGH LO and LOW LO like it is.
Power: LNB on
MOTOR SETUP
Motor/Goto: on (using the DiSEqc motor
(I reckon the SG 2100 is not a SLAB motor)
The LED on the 2100 lights up green
Since I was using the receivere with my C span system, I went ahead and set it back to the Factory Reset. Now I wonder if I screwed up?
How am I doing on that so far?
(I have a Satpros DSR 500 receiver, using a universal .3 SNH 031 LNBF)
LNB SETUP:
LNB type: Universal but left the HIGH LO and LOW LO like it is.
Power: LNB on
MOTOR SETUP
Motor/Goto: on (using the DiSEqc motor
(I reckon the SG 2100 is not a SLAB motor)
The LED on the 2100 lights up green
Since I was using the receivere with my C span system, I went ahead and set it back to the Factory Reset. Now I wonder if I screwed up?
How am I doing on that so far?
Hey, PSB!
Ok I will skip the Meter part.
I was told to go to G11 to set up the dish.
But the dangest thing is that when I select G11, the dish would go all the way west!!! I thought it was 91 degrees ! It done me that way twice.
Ok I will skip the Meter part.
I was told to go to G11 to set up the dish.
But the dangest thing is that when I select G11, the dish would go all the way west!!! I thought it was 91 degrees ! It done me that way twice.
I normally go to G4R on the c band and set that system like that.
On the FTA I was getting the CBS , UPN , and NBC channels.
Could I do the same for the FTA?
On the FTA I was getting the CBS , UPN , and NBC channels.
Could I do the same for the FTA?
USALS?
http://www.satelliteguys.us/showthread.php?t=72775
If you use USALS any satellite close to the top of your arc can be used to aim at!
http://www.satelliteguys.us/showthread.php?t=72775
If you use USALS any satellite close to the top of your arc can be used to aim at!
If your receiver is like my older Manhattan receiver, Go To X is the same as USALS, I think.
Al
Al
Thanks guys,
I copied the page PSB refered me to.
I will let yall know how I am doing so far...
I copied the page PSB refered me to.
I will let yall know how I am doing so far...
Question: What satellite will be in my true south? My zip code is 38759. I haven't done anything to my system since Sunday.
Last night, I hook up my Satpros DSR 500 receiver to my C Band system and programmed some satellites (like G4R and Satmex 5) to it. I thought maybe leaving it on one of the channels on G4R would help me while trying to aim for the satellites I watch all the time, and then program all the other satellites once I got the dish aiming right. I use to do this with the c band systems. As I said earlier the pole dish and everything is set up for my FTA system
When I go back to the FTA dish and try to aim some more, I will try to go to a channel I watch on G4R and (hopefully) when I get it in, go for the rest of the satellites.
Reckon that would work?
When I go back to the FTA dish and try to aim some more, I will try to go to a channel I watch on G4R and (hopefully) when I get it in, go for the rest of the satellites.
Reckon that would work?
MrFTAMan said:
Your TRUE south satellite is always the same as your Longitude!
91º
I would use Galaxy 11
Code:
Merigold, MS 38759
Latitude 33° 50.238'N Longitude 90° 43.536'W
Sat Name Sat Lng Az(t) Az(m) El Skew
--------------------------------------------------------------
Telstar 12 15.0W 98.1 97.5 3.1 -55.3
Intelsat 901 18.0W 99.8 99.3 5.6 -54.9
NSS 7 22.0W 102.2 101.7 8.9 -54.3
Intelsat 905 24.5W 103.8 103.2 11.0 -53.8
Intelsat 907 27.5W 105.7 105.1 13.5 -53.1
Hispasat 1C/D 30.0W 107.3 106.8 15.6 -52.5
Intelsat 801 31.5W 108.3 107.8 16.8 -52.0
Intelsat 903 34.5W 110.4 109.9 19.3 -51.1
AMC 12/T 11 37.5W 112.6 112.1 21.7 -50.1
NSS 806 40.5W 114.9 114.3 24.2 -48.9
Pas 3R/6B 43.0W 116.8 116.3 26.2 -47.8
Pas 1R 45.0W 118.5 118.0 27.7 -46.9
Intelsat 705 50.0W 122.9 122.3 31.6 -44.2
Intelsat 707 53.0W 125.7 125.2 33.9 -42.4
Intelsat 805 55.5W 128.3 127.7 35.7 -40.7
Pas 9 58.0W 130.9 130.4 37.4 -38.9
Amazonas 61.0W 134.3 133.7 39.5 -36.5
EchoStar 3 61.5W 134.9 134.3 39.8 -36.1
Rainbow 1 61.5W 134.9 134.3 39.8 -36.1
Estrela do Sul 1 63.0W 136.7 136.1 40.7 -34.8
Brasilsat B2 65.0W 139.1 138.6 42.0 -32.9
Brasilsat B1 70.0W 145.8 145.3 44.8 -27.8
Nahuel 1 71.8W 148.4 147.8 45.7 -25.8
DirecTV 1 72.5W 149.4 148.9 46.1 -25.0
AMC 6 72.0W 148.7 148.1 45.8 -25.6
SBS 6 74.0W 151.6 151.1 46.8 -23.2
Echostar 4 77.0W 156.3 155.8 48.0 -19.5
AMC 5 79.0W 159.6 159.0 48.7 -16.9
Nimiq 2/3 82.0W 164.6 164.0 49.6 -12.8
AMC-9 83.0W 166.3 165.8 49.8 -11.3
Brasilsat B3 84.0W 168.0 167.5 50.0 -9.9
AMC 2 85.0W 169.8 169.2 50.2 -8.5
AMC 3 87.0W 173.3 172.8 50.5 -5.5
IA-8 89.0W 176.9 176.4 50.6 -2.6
Galaxy 11 91.0W 180.5 179.9 50.7 0.4
Nimiq 1/4i 91.0W 180.5 179.9 50.7 0.4
Brasilsat B4 92.0W 182.3 181.7 50.6 1.9
IA-6 93.0W 184.1 183.5 50.6 3.4
Galaxy 3C 95.0W 187.6 187.1 50.4 6.3
IA-5 97.0W 191.2 190.6 50.1 9.3
Galaxy 16 99.0W 194.6 194.1 49.7 12.1
Spaceway 2 99.2W 195.0 194.4 49.6 12.4
DirecTV 1R/4S/8 101.0W 198.0 197.5 49.1 14.9
AMC 4 101.0W 198.0 197.5 49.1 14.9
Spaceway 1 103.0W 201.3 200.8 48.5 17.6
AMC 1 103.0W 201.3 200.8 48.5 17.6
AMC 15 105.0W 204.6 204.0 47.8 20.2
Anik F1/R 107.3W 208.1 207.6 46.8 23.1
DirecTV 5 109.5W 211.4 210.9 45.8 25.6
EchoStar 6/8/10 110.0W 212.1 211.6 45.6 26.2
Anik F2 111.1W 213.7 213.2 45.0 27.4
Solidaridad 2 113.0W 216.3 215.8 44.0 29.5
SatMex 6 113.0W 216.3 215.8 44.0 29.5
SatMex 5 116.8W 221.3 220.8 41.8 33.3
AMC-16 119.0W 224.0 223.5 40.4 35.2
DirecTV 7s 119.0W 224.0 223.5 40.4 35.2
EchoStar 7 119.0W 224.0 223.5 40.4 35.2
EchoStar 9/Telstar 13 121.0W 226.4 225.8 39.1 36.9
Galaxy 10R 123.0W 228.6 228.1 37.7 38.5
Galaxy 14 125.0W 230.7 230.2 36.3 40.0
Galaxy 13/H 1 127.0W 232.8 232.3 34.9 41.4
Intelsat Americas 7/Echostar 5 129.0W 234.8 234.2 33.4 42.7
AMC 11 131.0W 236.7 236.1 32.0 44.0
Galaxy 15 133.0W 238.5 238.0 30.4 45.1
AMC 10 135.0W 240.3 239.7 28.9 46.2
AMC 7 137.0W 242.0 241.4 27.3 47.1
AMC 8 139.0W 243.6 243.0 25.7 48.1
EchoStar 1/2 148.0W 250.3 249.8 18.4 51.4
Satellite Finder is (c) Copyright 2004, P. LutusPSB, a funny thing happens when I try to go to G11. While I am trying to set the receiver to go to G11, the dang dish would go all the way west bound. I know it is 91 degrees W. It did me twice that way. The satellites are supposed to be programmed in my receiver. When I go Menu and went to Satellite Collection (I check on satellites that I want to use and it has 91 degrees. I am going to try again this evening after work and reset my receiver. It was getting dark Sunday when I was on the system and these Mississippi mosquitoes don't have mercy on fools like me...
Yes you told me earlier to use G11 and I was having problems with the dish going there. G4 and the other satellites track ok. I will try again this evening...
Yes you told me earlier to use G11 and I was having problems with the dish going there. G4 and the other satellites track ok. I will try again this evening...
Last edited by a moderator:
Is there anyone on this site have a Satpros DSR 500 FTA receiver or know any sites (forums that deals with this receiver)?
HELP!!!!
HELP!!!!
Had my primestar 30"x40 on my sg 2100
Hi I am jackpeas@yahoo.com in chicago,ILL.I had my primestar on a sg 2100 hh motor.But it was to heavy.Now I have a stab 120 hh motor.PipeDream said:
Got some good news, yall!
Got the DSR 500 to work like it suppose to (so far!). Right now I got PAS 9, Nimiq 2, G3C, G11, and T6 birds. I am taking my sweet time programming the satellites.
I am getting alot of scrambled channels I can't watch, but I know I can get the free channels I want to receive.
Question: Right now I am receiving only the 5 digit frequencies which I know is Ku so does this mean I have to have a C band dish to receive the 4 digit frequencies? I noticed back when I was on the 4DTV system I was picking up only the 4 digit frequencies. But not the Ku frequencies.
I am new at the FTA world so any info from yall would be appreciated. Old John had been really helping me since we both are using the 1 meter Primestar dish and the mount Old John created for adapting the dish to the Moteck SG2100 motor drive work great!
Jackpea, look at Dirtyshame setup that was mentioned earlier in this thread. My dish system moves thru the arc with no strain.
Thanks to all who gave me suggestions on this project. I will try to use the DiseQc 4 way switch to tie in both dishs so I can get the channels I could get.
Got the DSR 500 to work like it suppose to (so far!). Right now I got PAS 9, Nimiq 2, G3C, G11, and T6 birds. I am taking my sweet time programming the satellites.
I am getting alot of scrambled channels I can't watch, but I know I can get the free channels I want to receive.
Question: Right now I am receiving only the 5 digit frequencies which I know is Ku so does this mean I have to have a C band dish to receive the 4 digit frequencies? I noticed back when I was on the 4DTV system I was picking up only the 4 digit frequencies. But not the Ku frequencies.
I am new at the FTA world so any info from yall would be appreciated. Old John had been really helping me since we both are using the 1 meter Primestar dish and the mount Old John created for adapting the dish to the Moteck SG2100 motor drive work great!
Jackpea, look at Dirtyshame setup that was mentioned earlier in this thread. My dish system moves thru the arc with no strain.
Thanks to all who gave me suggestions on this project. I will try to use the DiseQc 4 way switch to tie in both dishs so I can get the channels I could get.
Drat!
That's ok. I will get out the switch and tie the c band on in. I was hoping it would be different with the system I am working on.
I am still learning.
Thanks PSB!
That's ok. I will get out the switch and tie the c band on in. I was hoping it would be different with the system I am working on.
I am still learning.
Thanks PSB!
- Status
Similar threads
