Who told you that was a good meter for C Band (or anything else for that matter?)
Who told you that was a good meter for C Band (or anything else for that matter?)
Here is a link to the instructions if you are still looking for it.
http://sadoun.com/Sat/Images/Products/SATFIND95-Man.JPG
Just a reminder if you're trying to align a C band antenna. You need to make sure the meter is not in front of the dish when you're trying to peak the antenna. There is some sort of RF emissions from the meter that will fool the LNB and you may not get perfect alignment. You just need to have a piece of coax long enough to be clear of the dish. Have fun.
Will this meter work to align a Dish Network single LNb dish for the 110 satellite???
a few guys in here say its good to point the dish? why? it worked pretty good for me today i found 2 sats and aimed it G5 and F3
Yes, absolutely !Will this meter work to align a Dish Network single LNb dish for the 110 satellite???
I guess the difference is finding the satellite and fine tuning the lnb as that meter does not show signal quality which is critical for C Band or linear Ku Band alignment - more so than signal strength.
a few guys in here say its good to point the dish? why? it worked pretty good for me today i found 2 sats and aimed it G5 and F3
I guess the difference is finding the satellite and fine tuning the lnb as that meter does not show signal quality which is critical for C Band or linear Ku Band alignment - more so than signal strength.
I use mine every time I go sat hunting .
Wyr
It just reads signal on the 950-2100mhz IF frequency all the LNBs put out.im going to be putting a C/Ku Feedhorn on my other sat soon. so this meter wont find Ku.?