I want to connect more than 4 LNBs to a satellite receiver BUT I seem to recall that I can not do it using universal LNBs?
I am remembering wrong?
Thanks
I am remembering wrong?
Thanks
satellite switch 8 ports with universal LNBs
- Thread starter ken2400
- Start date
- Latest activity Latest activity:
- Replies 8
- Views 724
you are remembering right and wrong... what you cannot use are the 22KHz switches, since there's already one in the universal LNBF. So you can't stack a 4-port diseqc with 22kHz switches if the LNB(F)s are universal.
However, you can use an 8-port diseqc 1.1 switch, works great! I'm using one with several universal LNBFs without any problem
I'm using the GeoSatPro 8-port switch. I also have a Pansat 8-port but had a few problems with that one (minor problem)
However, you can use an 8-port diseqc 1.1 switch, works great! I'm using one with several universal LNBFs without any problem
I'm using the GeoSatPro 8-port switch. I also have a Pansat 8-port but had a few problems with that one (minor problem)
Thanks I have a few 4 port diseqc switches sitting around and I think I have a 22KHz switch. I found this and I think I can go cheap and not buy an 8 port? http://www.satelliteguys.us/xen/attachments/satellite-switches-simplified-pdf
Don't ever remove or install powered cables to a 22khz switch.Oh well 22KHz I have is bad. Looks like I am buying something
I read the same thing. I bought it used at some point and this is the first time I tried to use it. Off to the recycling center.
I just bought a
GEOSATpro 8x1 DiSEqC SWITCH
Did you order it from Hypermegasat? Hypermegasat.com, FTA Switch etc Or his Ebay store, which is a few cents cheaper.
Should have ordered direct I might have saved NY state sales tax? I bought on E-bay
