Ok looking in the specs of my owners manual from my Pansat 9500HDX I see that under LNB Power it says 14V/19V (400mA Max) Now looking at the specs of my DMS SG-2100 HH motor it says 350mA Max draw. Now connected to the output of my 2100 I have a Avenger PLL that draws 165mA. If I do the math here on long arc swings I could be pulling 515mA out of the receiver putting out 400mA Max correct? My 2100 is a few years old now and traveled many, many times across the arc which could be drawing the max. My problem is I'm blowing LNBF's ounce and a while when moving the dish.