Just swapped out my 6 x 8 switch with a SWM8 switch, have 4 RG6 lines coming from dish, plus 1 RG6 from the 95* orbit slot. Using a 1 x 4 splitter connecting 1 H20-600, 1 H21-200, 1 H20-100, 1 HR21-100(DVR) and a R15. I installed the HR21-100, the H20-100 and R15 with no problems. The HR21-100 and H20-100 both have SWM satellite signal strength screens. The H21-200 and H20-600 DO NOT have a SWM satellite signal strength screen. Shouldn't I have a SWM satellite screen? The H21-200 is working, it has been installed for 6 days. Is this a problem, no SWM satellite?
SWM8 self install
- Thread starter jhnh
- Start date
- Latest activity Latest activity:
- Replies 2
- Views 2K
-
WELCOME TO THE NEW SERVER!
If you are seeing this you are on our new server WELCOME HOME!
While the new server is online Scott is still working on the backend including the cachine. But the site is usable while the work is being completes!
Thank you for your patience and again WELCOME HOME!
CLICK THE X IN THE TOP RIGHT CORNER OF THE BOX TO DISMISS THIS MESSAGE
- Status
If it works, it is not a problem. On several installs using the SWM-8, I have not seen a seperate 'sat' for the SWM.
I'd agree, don't worry. My H20-600 shows the SWM-8 firmware in the systems information but does not show a SWM satellite screen. It works and that's good enough for me.
- Status
