Titanium ASC1 Satellite Dish Antenna Actuator Motor and Polarity Skew Controller

  • WELCOME TO THE NEW SERVER!

    If you are seeing this you are on our new server WELCOME HOME!

    While the new server is online Scott is still working on the backend including the cachine. But the site is usable while the work is being completes!

    Thank you for your patience and again WELCOME HOME!

    CLICK THE X IN THE TOP RIGHT CORNER OF THE BOX TO DISMISS THIS MESSAGE
Status
Please reply by conversation.

jnoda1

Well-Known SatelliteGuys Member
Original poster
May 24, 2010
26
0
miami
Hello, I seem to be having a problem with this controller, it seems that it will not come on, I have changed the fuse many times, have checked the fuse with a meter and still nothi
 
A few things to check. Make sure the voltage input selection is 115v not 230v. Make sure the "Lockout" button on the front panel is not engaged if using the front panel buttons and make sure the remote batteries are installed correctly if using the remote. And of course the power switch itself ;)
 
  • Like
Reactions: Titanium
Hello, I seem to be having a problem with this controller, it seems that it will not come on, I have changed the fuse many times, have checked the fuse with a meter and still nothi
Check out my reply in the email I sent. Check all of those things.
 
  • Like
Reactions: Titanium
Status
Please reply by conversation.

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Who Read This Thread (Total Members: 1)