Transponder question

[perkunas]

I finally got my motorized Ku band system running.(I couldn't do it without you guys thanks)
I have a standard LNB
1) On Galaxy 28, I was hoping for BYUTV but its not there, maybe my transponder settings are off IDK
2) I Cant get anything on AMC-21 I'm thinking the LNB is wrong, as its standard not circular, and if that's the case whats the easiest way to fix it.
Any help is greatly appreciated
tnx

 

[KE4EST]

If you have a standard linear LNBF with local Oscillator at 10750 MHz then you have the right LNBF. Those are not circular.

 

[northgeorgia]

You're right. The BYU-TV feeds are not on 89W at the moment. Did you get "Ch-2" (KETV Ch. 7) on 12196 H 2784 on 89W?

 

[perkunas]

Did you get "Ch-2" (KETV Ch. 7) on 12196 H 2784 on 89W?
No (ill make sure later) and thanks, all i was getting was stuff from the adjacent sat.
Not getting anything on AMC-21 will try some more transponders not sure how good this list is.
where is byutv now anyway.

 

[northgeorgia]

Not sure why, but they sometimes go off the air. I haven't seen it in at least a week

 

[cyberham]

BYU is not good for dish alignment since you never know if it's on or not. Colour bars are on 24/7 at 12131 V 10369.

 

[pwrsurge]

BYU is actually still on G28 but recently changed transponders to 11884 H 2788 4/5 DVB-S2 QPSK
However, their signal is fairly weak so an undersized or misaligned dish won't receive it. As well, you need a DVB-S2 capable receiver to tune it in


Sent from my Q10 using Tapatalk now Free

 

[cyberham]

Now BYU is only 49% whereas my favourite colour bars are 73%.

 

[northgeorgia]

Rescan 89W. They're on again with the new parameters pwrsurge mentioned above. (Also low here, at around 42Q)

 

[jorgek]

Scanned in here as Ch NoAmerica per Pwrsurge info. Q 60.