warm up cycle then off

Status
Please reply by conversation.

dumbjim

Active SatelliteGuys Member
Original poster
Jun 6, 2009
20
0
st. louis mo.
Help! My beloved DSR922 is behaving strangely. After roughly 5 mins., it clicks off then goes through the warm up cycle, will work for another 4 or five mins., then bang, it does it again. I've tried unplugging it for several minuets but that doesn't correct the issue. Any ideas?
Thanks
 
Register to hide this ad
Yup, bad LNB or cable... There's a protection circuit in the DSR series of receivers, that will shut it down if too much current is drawn at the LNB port, such as a short in the cable somewhere, or the LNB itself.
 
As an after thought. It's great you can post a problem and in less than 24 hrs. get advice from people who know what their talking about.
Thanks!
 
Status
Please reply by conversation.

C-band LNBS strange problem

Who all are using combo C/KU LNBFs

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Who Read This Thread (Total Members: 1)

Latest posts