The first attempt at rotor support for TVHeadend has been posted to GITHub.
This release supports USALS and GOTOX. It even allows both rotor types in series on the same DVB card.
Please help us test this for bugs and provide feedback if possible by replying to this thread. Thanks. Below is...
I would appreciate expert advice with my problem locking High FEC (9/10) TP's on my 10' Mesh. I can receive some TP's on the SAT in question (97W) with 100% Q but they are low FEC. The high FEC TP's bounce from 0 to 70 but don't stay at 70 long. I was given this dish from a house about 5...
I have not been able to lock High FEC DVB-S2 feeds on my 10' MESH. Can someone please offer steps I should take to tweak my dish and LNB? Should I start with LNB F/D, skew, centering? I really want to lock the CBS feeds on G28 and G19. I am knew to CBAND and most likely don't have my LNB...
I have been having trouble tuning anything west of 107W. I think it is because of trees. Please look at the pic taken from behind the dish and let me know if you agree. Thanks.
I have a 36" Von weis actuator. I have it centered on 72W. I can tune as far east as 20W. How far west should I be able to go? Is there a way I can adjust the actuator to not go as far east but go further west?
My longitude is 75.7. I used 72W as my true south. I had the actuator to the west by 40 counts when finding 72W. I can tune 20W to 107W. I cannot tune anything above 107W. I am concerned that trees might blocking my LOS. But, I want to make sure it is not an installation mistake. Is it...
I am not sure if there is a bug in the scan and s2-scan command or if I am confused. I used to specify -l 10750 for my STANDARD KU LNB. After performing various ubuntu upgrades. I no longer can tune anything when specifying this. I can tune if I omit it. But what confuses me is that the...
I am recently having a problem tuning the PROF 7500 in ubuntu. It used to work in the past - I think I might have messed it up with an update. If I disconnect the COAX and connect to my Traxis 3500 my entire setup works fine. But in ubuntu I get the following in the log when scanning...
I have not been able to get on the roof to determine my sensor type or cabling color function. I do have 3 sensor wires and my actuator is old. Can I safely assume it is a Hall sensor?
Is it OK to use a Hall instead of replacing it for a reed? What is the benefit of the Reed? Is it...
I am trying to set up a 10' BUD. I only have a PROF 7500 and a Twinhan 102G as a tuner. Does anyone have any tricks for identifying Satellites using command line tools? Is there a way to query the Satellite for it's name or something similar?
My 3500 stopped responding to the remote. I replaced the batteries and verified using a digital camera viewfinder that the IR is flashing. Could the remote still be bad or is it the receiver? Can I access the menu for blindscanning w/o the remote? Please help. Of course it decided to stop...
Please help me answer the following questions:
-How can I set the skew on the DMX241 while the dish is not at the APEX? It is on my roof and not possible for me to access the LNB while the dish is at the APEX.
-Is the DMX241 better or easier to setup than the original Eagle Aspen General...
I am in process of setting up my 10' dish. I am trying to determine what model of Perfect 10 I have. The FD is different for each model. Is there a way to determine if I have the 10S, SI, or the PE1000. I can try to post a pic tomorrow. Thanks.
I am trying to complete setup of my 10' mesh. I was given it from a nice lady about 5 miles from my house. Am I correct in assuming that I should not need to adjust the Inc/dec settings? I am concerning myself with finding the ARC and making sure the new LNB is at the correct FD. My KU true...
My journey for C Band has not been easy. I have several obstacles to putting my 10' Mesh BUD up. I am now considering it might be easier to buy the 6' special. This depends on the answer to this question. Can I mount the 6' dish on my roof using a large J Pole with struts? Has anyone done...
Does anyone know if there are plans to make an ATSC or clear QAM tuner card for the AZBOX Premium Plus? This would make me abandone mythtv completely and purchase an AZBOX. Thanks.
I don't think I have enough room for my 10' perfect 10 mesh dish. I think I can fit a 6-7 foot dish. Please reply if near northeast PA and would like to trade. I also have other computer/electronics to trade if not interested in the 10' BUD. Thanks.
I wanted to know if anyone on the forum uses Mythtv for watching FTA - specifically sports feeds. I have not had much luck using. My frontend seems to crash on many different types of feeds. Has anyone been able to resolve these issues?
Are you able to get any of the following transponders on your mini-BUD?
89W 3820,3940,4100
91W 3800,4060
93W 3880
95W 4020,4140,4160
97W 3720,3740,3800,3880,4000
99W 3940,3980,4120
121W 4040
137W 4160
I am planning my 10' BUD install on the side of my house. I only have 8' from my house to my property line. My true south sat (74W) is perpendicular to the property line and right above the center of the neighbor's house. Do you think I have enough room to install the BUD and have it track...
What does the Motorola announcement mean? Will there be any 4DTV programming available after 12/31? Will 4DTV receivers have any value at this time? Thanks.
I have a 10' Mesh dish stored in pieces in my garage. My wife has reluctantly allowed me to install it. I have only 2 options for an install location due to LOS. I can install on my roof or on the ground on the side of my house. I only have 8.5' of land from the side of my house to the...
I have been investigating the possibility of using a mini-BUD to get the ABC/ESPN feeds. Has anyone had any luck with this? Or for the CBS football feeds? I live in NE PA. If anyone has done this successfully what LNB and dish was used? Thanks.
I have a 39" offset dish w/ KU LNB setup nicely to receive 72W - 125W w/ an SG2100. This might sound crazy, but do they make a 6 foot offset dish that is constructed just as light as my 39"? How about a C band LNB that would mount on it? It would be nice to swap my 39" for a 6' and get some C...