Search results for query: *

As I mentioned in another thread, I managed to destroy one of the sort-of-U bolts (they're more like V-bolts) on my STAB HH120 motor. I thought I had somehow gotten a nut cross-threaded, but it turns out the bolt itself had been bent slightly. I didn't notice anything except that the nut...

OK, that's sort of what I figured was going on. I don't really need to worry about the DiSEqC 1.2 settings, as I simply want to set up my receiver in USALS mode. What I wasn't sure about was whether changing DiSEqC 1.2 positions affected where the motor thought the USALS positions were, but I...

Heh... My girlfriend's Canadian, so I get to hear the snow reports pretty regularly. I, however, live in Florida (at least for now), so I get to trade snow for deadly spider attacks. Personally, I'll take the spiders over the cold weather, but I'd also take the Canadian health care system over...

Thank you! That's exactly what I wanted to know. And it's the fact that Sadoun has people posting in forums like this that keeps me buying from you guys. ;-) In re-reading the manual, all references to "resetting" the motor seem to be in regards to sending it the "go to zero position"...

That's definitely a good idea, but it wouldn't have helped in this case. This motor and its associated hardware is brand new. Somehow one of the nuts got cross-threaded, I think. Don't ask me how - it seemed properly threaded for the first 1.5 inches or so. It got itself so thoroughly locked on...

Now that you mention it, my front yard (where the dish is) is full of brown anoles. I'm surprised they haven't eaten all the spiders in the area. They really are excellent at insect/arachnid control. If anyone's got any tips on making my dish more lizard-friendly, I'm all ears (or, you know...

I'm not sure I follow either. I'm trying to figure out if my tinkering with DiSEqC 1.2 caused the USALS satellite positions in the STAB motor's memory to change, or if those two have nothing to do with each other. If the motor positions are incorrect, I want to do a full reset of the motor...

I have a STAB HH120 motor connected to a Fortec Lifetime Classic NA receiver. For a while I had my dish slightly misaligned, so I would let the motor position itself to where it thought the satellite should be, using USALS. Then I'd switch the receiver to DiSEqC 1.2 mode and "bump" the dish...

So, being the sort of obsessive satellite hobbyist one finds on these forums, I couldn't leave well enough alone. As I posted in another thread, I had a relatively functional motorized Primestar dish setup on Saturday, insisted on "tweaking it a little" on Sunday, and completely hosed everything...

Thanks! If that's true, it would be incredibly helpful. I've tried putting my angle finder on that spot before, but I never thought to subtract the value given by the finder from 90, which makes sense now that I think about it. I came up with an idea for aligning the dish relative to the motor...

Friday I received my STAB HH120 motor, onto which I mounted my old Primestar dish using the 3" adaptor rings designed to adapt Channel Master dish mounts to the STAB motor. My understanding is that the 40x30 Primestar dishes are rebranded Channel Masters anyway, so I figured why not give it a...

Hi, all! I've been out of the FTA scene for a while (I was last active here in early 2006) and since then, obviously, a few things have changed. One seems to be that a lot of people have the Fortec Star Mercury II receiver. I glanced at the specs, but I can't see how it's really all that...

Man, it kills me that The Red Green Show is ending. I just discovered it last year. Maybe they'll release the whole series on DVD eventually. I've been planning a move to all-FTA for quite a while now. I still have a ways to go, as I want to do it right. I'm a Linux geek, and my ultimate plan...

If you download the PDF manual for the HH120 you'll see that STAB actually makes a pair of adaptor rings for the shaft specifically for fitting Channel Master dishes (which is what a big Primestar dish is) with 3" pole mounts. Unfortunately, I can't find anyone anywhere who stocks them. I think...

Add me to that list! Back when DirecTV had Newsworld International, it was great. I loved watching the CBC's international news programs. They were the best source of news in North America, as far as I'm concerned. Now I'm stuck with getting BBC World from the local PBS affiliate, which is OK...

I used galvanized fence post and filled it to the top with Quikrete. As I filled it, I'd kick it repeatedly to shake out all the air bubbles (and there were a lot of them). I'd add Quikrete, a little water, kick-kick-kick, repeat until no more bubbles came out. It set up hard as a rock and...

Firefox 1.5.0.1 on Linux, working perfectly now. I haven't seen a single blank page yet, and I'm 98% sure I tested it with Firefox 1.5.0.1 on Linux a week or two ago and had problems, so this is a good sign.

Thanks for the reply. I was afraid the situation was something like that. What's an "SC HD" receiver? I assume it's a StarChoice non-DVR receiver?

Who, dare I ask, are the Dish Audit Police?

I'm a Linux/Firefox user and have also had problems with the Sadoun site. It's happened under Firefox/WinXP as well. I did some packet captures using Ethereal to try to track down the problem, but it wasn't immediately clear what was going on. I eventually got around to sending the dump file to...

Hi, all. My girlfriend's Canadian and a StarChoice subscriber, so I'm asking this question on her behalf. She wanted something comparable to my DirecTivo, so she got the DVR-530 HD DVR from StarChoice (she has no HDTV, but wanted the dual tuner, PVR, etc.) She's had nothing but trouble with it...

Well, it came in the original box and it says it does Digicipher (although it doesn't say DCII). I'd be perfectly happy if it did just analog, though. I've heard others on the forum talking about how they have DCII receivers and how they'll only work if they were ever activated, at least once...

I bought a General Instrument DSR-1500S receiver on eBay for $40 or so. It was supposed to come with a user manual, but the seller forgot to include it. I asked them to send it, and they said they would, but never did. Such is life on eBay, I guess. Anyway, I have this very professional-looking...

Those are great, for sure, but won't really work for me. I don't so much care about the effects of cold. Where I am in Florida it never drops below freezing for more than a few hours. I can't imagine how to align a large dish mounted on a non-cylindrical pole without a huge amount of trouble...

I'm glad this thread came up, because I'm planning on installing a pipe myself. In looking around the home improvement stores, I've noticed various types of pipe. Fence post looked tempting, but awfully thin-walled. I've also seen iron pipe, but will that rust over time? What the heck should I...