This is a mobile optimized page that loads fast, if you want to load the real page, click this text.

BandStacked LNBF and Skew

Status
Please reply by conversation.

chapelrun

SatelliteGuys Pro
Original poster
Pub Member / Supporter
Feb 12, 2008
965
14
Berryville, VA
I just got an Aspen Eagle B1 Sat BandStacked C-Band LNBF for me little 5 foot Channel Master dish. Want to use this fixed on one Satellite.

I see the two pins set inside 90 degrees apart but how do I set the skew for this LNBF. I have never done BandStacked on a C-Band LNBF before.
 
reading material:

I had this info in my archive:

KB2KIR: Receiver settings for B1Sat Stack Lnbf
http://www.satelliteguys.us/c-band-...10746-receiver-settings-b1sat-stack-lnbf.html
OnceWasLost: how to orient the B1Sat
http://www.satelliteguys.us/c-band-satellite-discussion/142224-b1sat-stacked-c-band-lnbf.html
- couple more threads on the subject, recommended by Iceberg:
http://www.satelliteguys.us/c-band-satellite-discussion/152508-review-b1sat.html
http://www.satelliteguys.us/c-band-satellite-discussion/147673-2-c-band-lnbs-6-foot-dish.html


Or talk to Tron.
I think he's happily running one or two of 'em! - :up
 
I havent had one hooked up recently but the "flat" edge where the coax is should be at 0 degrees...flat should be horizontal

in the pic below the LNB (left one) is near 0 skew
 

Attachments

  • 000_0672.jpg
    108.2 KB · Views: 139
Status
Please reply by conversation.

Similar threads

Titanium LNBF Problem
Replies
12
Views
2K
LocutusOfBorg
Testing the new Titanium C138 Performance Plus C Band LNBF
Replies
63
Views
11K
Titanium
Put a KU lnbf on my 8' SOLID Cband Dish
Replies
27
Views
4K
flody1
127w strange skew on horizontal TPs
Replies
2
Views
1K
Cham
H
galaxy 35 and 36
Replies
4
Views
1K
Houston Rockets
H
Menu
Log in
Register