It wouldn't surprise me if a Hopper Duo had at least limited functionality (much like a 722) when used with a dome (not the DISH branded portables). Haven't tried it so just guessing.
Dish in RV
- Thread starter Jackonearth
- Start date
- Latest activity Latest activity:
- Replies 34
- Views 3K
-
WELCOME TO THE NEW SERVER!
If you are seeing this you are on our new server WELCOME HOME!
While the new server is online Scott is still working on the backend including the cachine. But the site is usable while the work is being completes!
Thank you for your patience and again WELCOME HOME!
CLICK THE X IN THE TOP RIGHT CORNER OF THE BOX TO DISMISS THIS MESSAGE
There's not likely to be an update for the Hoppers that will control a dome since the domes do not support the multiple tuners and satellites that the Hoppers programmed for.
It needs to be between 500gb and 2TB, self powered (some will work off usb power but no guarantees if it will work tomorrow).
Myself I use hard drive docks and swap out internal type drives to keep a library of programs, similar types on one HDD.
Can the LNB on the Trav'ler dish be changed?
Can it support an external switch?
The idea I'm playing with is if I connect the DPH42 switch to it, I can use it with the Hopper 3 which the dish alone doesn't support.
Can it support an external switch?
The idea I'm playing with is if I connect the DPH42 switch to it, I can use it with the Hopper 3 which the dish alone doesn't support.
Yes, the Trav'ler LNB can be changed, but with a DPH42 switch no change is needed. A third coax does need to be added from the existing WA DPP LNB to the DPH42 though.
Yes, the Trav'ler uses a standard Dish western arc triple DPP LNB with 3 output and one input ports.
I can attest the preferred way to prep a Trav'ler for a Hopper 3 is the DPH42 Switch.
You can put a Hybrid LNBF head on the Trav'ler but the seeking logic in the Trav'ler doesn't work well with the Hybrid LNBF.
I believe the issue is the voltage needed by the Hybrid LNBF isn't generated by the Trav'ler logic and the Hopper 3 needs to be disconnected while the satellite seeking is going on.
The DPH42 is only a few bucks more that a Hybrid LNBF and you have a lot of wiring options.
You can put a Hybrid LNBF head on the Trav'ler but the seeking logic in the Trav'ler doesn't work well with the Hybrid LNBF.
I believe the issue is the voltage needed by the Hybrid LNBF isn't generated by the Trav'ler logic and the Hopper 3 needs to be disconnected while the satellite seeking is going on.
The DPH42 is only a few bucks more that a Hybrid LNBF and you have a lot of wiring options.
The most efficient RV solution for a Hopper 3 is to use a DPH42 switch with a Winegard SK1000 (or an RF Mogul Eagle 3). Then for those times you're parked under trees or need to use the Eastern Arc sats, use a tripod mounted 1000.2 dish with a Hybrid LNBF. With the Hybrid, you only have to run a single coax from the tripod dish to your RV like so:
Nice graphic. Thanks.The most efficient RV solution for a Hopper 3 is to use a DPH42 switch with a Winegard SK1000 (or an RF Mogul Eagle 3). Then for those times you're parked under trees or need to use the Eastern Arc sats, use a tripod mounted 1000.2 dish with a Hybrid LNBF. With the Hybrid, you only have to run a single coax from the tripod dish to your RV like so:
Thanks for all the info. I wouldn't have known about the compatibility issue with the hybrid LNB otherwise.
