I am looking for a Satellite dish motor for a 33" dish. Which of the two following motors is the better one.The STAB HH90 Motor or the Moteck SG2100 motor?One is 84.99 and the other is 89.99. Thanks in advance.
FTA Satellite Dish Motor
- Thread starter stinkygopher1
- Start date
- Latest activity Latest activity:
- Replies 16
- Views 2K
Yes, it is built better and by the same guys that invented USALS.
Where did you find the prices that you listed? I was helping a friend get started with Ku last week and $125 was the cheapest that I saw for a STAB HH90.
Thanks,
Norman
Hi Norman.It's a place in Ontario Canada called Dr.Sat - The Satellite Doctor Dr. Sat :: Satellite, OTA Antenna, IPTV, Phone & Internet services
Listen to these guys recommending the Stab. I would encourage you to consider the Stab HH120 if available and affordable just in case you choose to get a 1.2m dish someday. Everybody either eventually wants or gets a larger Ku dish.
Having said this, I have a DG2100 since I bought it years ago and I was able to physically pick it up in my town. This motor is still working well to this moment turning a 1m dish.
Sent from my SM-G950W using the SatelliteGuys app!
Having said this, I have a DG2100 since I bought it years ago and I was able to physically pick it up in my town. This motor is still working well to this moment turning a 1m dish.
Sent from my SM-G950W using the SatelliteGuys app!
Thanks Cyberham. I have a 10 ft mesh dish I got for nothing and once I get it up and running I might not need anything bigger. Put my money in the 10 footer. We don't have much to choose from here in the eastern part of Canada so everything we need we have to order.
I used to drive along Route 126 for my work between Moncton & Miramichi. If I recall, that is the route where I saw many 10-footers installed at homes. I often wondered if some might be available for taking with a simple inquiry of the home owner. Maybe even for free.
Sent from my SM-G950W using the SatelliteGuys app!
Be sure that you order the correct STAB model to fit the dish pole mount. The HH90 is for the 1 7/8" (1.66") post size.
Only the manufacturer of the best radios in the world: Icom. I may be biased.
Sent from my SM-G950W using the SatelliteGuys app!
Yes..they are a good radio. I have had a few of them over the years.Been so long since I have had my radios out forget what I have now.
Similar threads
