I manually updated my 2 Hopper 3 receivers to H396 and my Joey3 to J596. I don't know what this software update does.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
What is IPLL?Signal Protector and IPLL channel improvements are the big ones, but some small fixes thrown in there as well.
could always give release notes/change logs, but then it been years since I last seen such notesSignal Protector and IPLL channel improvements are the big ones, but some small fixes thrown in there as well.
What has changed with Signal Protector?Signal Protector and IPLL channel improvements are the big ones, but some small fixes thrown in there as well.
You need a new 40.0 remote.brittanygarden
Has this been fixed with the latest release?:
Ever since the previous version, when using my 40 remote with my H3 I get the "low battery" warning, even though the batteries are new. It doesn't do it for the 54 remote (also I have been using the 40/H3 combo for years without any problems).
IPLL (internet protocol live linear) is any channel with the word STREAM in the GuideWhat is IPLL?
Some things are proprietary and can't be shared, but I'm happy to answer any questions I'm able to.could always give release notes/change logs, but then it been years since I last seen such notes
ThanksIPLL (internet protocol live linear) is any channel with the word STREAM in the Guide
when then in the case I ask my question again has the glitch in livetv buffer on streaming channel been fixed? cause currently if I hit skip back on steam channel livetv buffer it jump forward to end live tv buffer cause appearance there is buffer ahead of live tv sh*t skip back jump forward in streamSome things are proprietary and can't be shared, but I'm happy to answer any questions I'm able to.
I just updated to H397 from H392. Also, updated Hopper Plus software to P13712 from P13402
What's new in these versions that you can reveal, brittanygarden?
brittanygarden - with a Hopper 3 and Hopper Plus setup, I can see somewhere after P13402 and P13712, the settings cogwheel when one hits the Home button is no longer on the right hand side but now closer to the left center of the screen and the text for things are small. One thing I noticed from H397 from H392 and P13712 from P13402 is that I keep my Hopper 3 on never inactive so it's always on but if I turn off my TV using the TV power button on the 50.0 and 52.0 remotes and then turn the tv back on, the Hopper does not seem to stay on the last watched channel before the tv was turned off but instead, it is on channel 101 which is DISH Scapes. I tested this by turning the TV off and then back on 20 seconds later with the same exact same results of it going to channel 101 when the tv is turned on again.It seems like for me, the nightly reboots has not updated anything on it's own as the last update which was forced manually still shows as late April 2025 being H392. Does the IPLL improvement fix these two issues on streaming channels? I noticed like for example, if the current time is 5:05PM, if I paused it for 5 minutss, sometimes it will unpause itself and be live again a few minutes later. The other annoying issue is that, I can rewind and it will go from 5:00PM all the way to 1:00PM but nothing in between as from 1:00PM, a skip will end up at 5:00PM. Isn't the Live buffer supposed to be 1 hour only? How is it going back 4 hours earlier? One time when I rewind, it went to 1:00PM but it was 1:00PM the day earlier because the same day 1:00PM was already a new show which I did watch earlier in the day and the 1:00PM it showed when rewinded was what was shown the day before.
I just updated to H397 from H392. Also, updated Hopper Plus software to P13712 from P13402
What's new in these versions that you can reveal, brittanygarden?