hddvr 24 wireless hook up to internet

[prop]

i guess i need a wireless video bridge or something similar?i am not using a swm just 2 wires into the ird.what do i need? thanks for any help

 

[rad]

A wireless video bridge is if you're installing a wireless client, like a C41W or C61W. If you want a wireless connection then you want DIRECTV Wireless DECA Ethernet Over Coax Adapter (CCK-W) from Solid Signal

 

[HoTat2]

Although I would advise you to use rad's link to Solid Signal for illustration only. And look on ebay for deals of actual purchase at a much lower cost.

I like third party sellers such as S.S. or Weaknees, but they're just too darn expensive in most cases.

Sent from my LM-V405 using Tapatalk

 

[TheTechGuru]

i guess i need a wireless video bridge or something similar?i am not using a swm just 2 wires into the ird.what do i need? thanks for any help

I'm using a PowerLine adapter on one of mine. You can also use a RJ45 to Wifi bridge.

Once you connect the Ethernet you need to reboot the receiver for it to detect it.

 

[HoTat2]

... You can also use a RJ45 to Wifi bridge.

Once you connect the Ethernet you need to reboot the receiver for it to detect it.

Although the DCCK-W can also be used as an RJ45 ethernet to WiFi adapter.

You don't have to use MoCA coax to WiFi.

Plus I think the DCCK-W would actually be better in that role since the firmware on the HR24 will automatically detect the DCCK-W and display its setup and configuration screen on the TV set.



Sent from my LM-V405 using Tapatalk