Thanks for the suggestion, however, my Options menu does not have those options. I looked through the whole settings menu and could find an option for unsubscribed/subscribed toggle.
Thanks for the suggestion, however, my Options menu does not have those options. I looked through the whole settings menu and could find an option for unsubscribed/subscribed toggle.Temporary (hopefully) work around for guide lock is to press Options, 5 (all unsubscribed), Options, 4 (all subscribed), Back, Guide. Guide is now normal for a while.
I have had this problem off and on for several years both on my Hopper 3 and my Joey3 - not new.
OOPS! I skipped the first step which is to open the guide, does that help?Thanks for the suggestion, however, my Options menu does not have those options. I looked through the whole settings menu and could find an option for unsubscribed/subscribed toggle.
I've had the lip sync issue on CMT for a long time, but I have HWSUpdated my H3 to H312 and started experiencing a couple bugs.
1) Watching Ch 106 (TVLand) and hitting Guide button brings up the guide, but it jumps to channel 9681.
2) Terrible lip sync problem on Ch 166 (CMT).
I've restarted and rebooted a couple times but both of these issues remain. They did not exist prior to the update.
Doh! You may have omitted it, but I can't believe I didn't figure it out. I knew I had seen it that option before!OOPS! I skipped the first step which is to open the guide, does that help?
No, not that I've heardHave they paused the update?
Yeah I have 4 4K inputs, I've tried different ones, different HDMI cords. I have multiple 4K devices, the Hopper is the only one that gives me HDCP errors.FLEABttn, do you have any other inputs in use on your 4K TV? I got the HDCP error and tried removing my eARC and Blu-Ray cables and it went away. I have my Hopper 3 connected directly instead of through my AVR. I replaced my eARC HDMI cable with a high-speed cable (the old cable was a MonoPrice cable I’ve had for at least a dozen years.).
There was also a 4” HDMI M-F flat extension that was needed due to the bend radius on the MonoPrice cable preventing it from not sticking out from behind the bezel. That could have been the problem as well.
I was suggesting removing all your HDMI cables except the one between your Hopper 3 and your TV, even the eARC to your AVR. Just for testing.
Which year, make, and model is your 4K TV? I’ve got a 2018 LG 55C8PUA which would always give me grief trying to tune in 540-01 events. The Hopper 3 has always been connected via a 6’ HDMI cable to HDMI 1 on the LG. I eventually bought a bunch of HDMI High Speed cables but I kept on seeing the HDCP errors with the LG. Today I finally unplugged everything except the Hopper 3 and I haven’t seen the HDCP message since.
What happen?I made the mistake of forcing the update since there was talk here of it fixing the HDCP error. I won’t do that again….
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?