Newbie to FTA. Need help.
- Thread starter bprm4rnt
- Start date
- Latest activity Latest activity:
- Replies 6
- Views 2K
-
WELCOME TO THE NEW SERVER!
If you are seeing this you are on our new server WELCOME HOME!
While the new server is online Scott is still working on the backend including the cachine. But the site is usable while the work is being completes!
Thank you for your patience and again WELCOME HOME!
CLICK THE X IN THE TOP RIGHT CORNER OF THE BOX TO DISMISS THIS MESSAGE
- Status
Sure, and welcome to the forum!
We have plenty of help available .
Which dish 'n LNB do you have, and which satellites were you looking for?
... and if you need aiming info, what general area are you in?
City/State/Provence, or Zip code would help.
We have plenty of help available .
Which dish 'n LNB do you have, and which satellites were you looking for?
... and if you need aiming info, what general area are you in?
City/State/Provence, or Zip code would help.
Welcome! I'm also playing around with the same receiver - lots of good info on the various boards here. To get you started, go to the FTA Manuals section and you can download the manual for your CS.
Note: Manual isn't real clear on what to do when you hit the "enter PIN" screen. Factory default is 0000.
Mike
Firmware available from the Coolsat website.....
Coolsat USA - Official Web Site of Free To Air Satellite Receivers
Coolsat USA - Official Web Site of Free To Air Satellite Receivers
You should'nt need any software, just a 36" or better dish and a linear lnb, Keep us posted and good luck.
LAK - if you look at the site, they no longer support the 6000.
It's there:
- Status
Similar threads
