Newbie to FTA. Need help.
- Thread starter bprm4rnt
- Start date
- Latest activity Latest activity:
- Replies 6
- Views 2K
- Status
Sure, and welcome to the forum!
We have plenty of help available .
Which dish 'n LNB do you have, and which satellites were you looking for?
... and if you need aiming info, what general area are you in?
City/State/Provence, or Zip code would help.
We have plenty of help available .
Which dish 'n LNB do you have, and which satellites were you looking for?
... and if you need aiming info, what general area are you in?
City/State/Provence, or Zip code would help.
Welcome! I'm also playing around with the same receiver - lots of good info on the various boards here. To get you started, go to the FTA Manuals section and you can download the manual for your CS.
Note: Manual isn't real clear on what to do when you hit the "enter PIN" screen. Factory default is 0000.
Mike
Firmware available from the Coolsat website.....
Coolsat USA - Official Web Site of Free To Air Satellite Receivers
Coolsat USA - Official Web Site of Free To Air Satellite Receivers
You should'nt need any software, just a 36" or better dish and a linear lnb, Keep us posted and good luck.
LAK - if you look at the site, they no longer support the 6000.
It's there:
- Status
Similar threads
