This is a mobile optimized page that loads fast, if you want to load the real page, click this text.

replace joey with superjoey

E

ekilgus

SatelliteGuys Pro
Original poster
Jan 22, 2007
1,334
1,008
Southeast US
I'm considering replacing my wired joey with a super joey but may have a wiring issue. I only have 2 wires coming in from the dish (1000.2). I believe the third node on the Dish accommodates the wing dish.
I've heard there is an alternative wiring method. Is this correct?
 
The LNBs prior to the hybrid models have 3 outputs and one wing dish input. Two of the outputs go to the node and then on to the Hopper as a single coax. The third output goes an "integrator" and on to Super Joey. The installer should be able to run a third line from the dish for the Super Joey.

The Hybrid LNBs only have two outputs plus a wing dish input and therefore would not support a Super Joey.

Maybe it's time to consider a Hopper 3 upgrade.
 
Joe891 said:
I assume you don't have a hybrid lnb than? They installed the hybrid lnb when I added a super joey instead of running a third line from my previous lnb
Click to expand...

Ya that’s what I thought he would do but he had to run 18 miles to get a super joey he thought he already had. He said they loaded his van Wednesday but I was a last minute appointment cause they scheduled me Thursday and he didn’t know that. My guess is he doesn’t have a hybrid lnb on him. At least this time he’s the one burying the line.



Sent from my iPhone using the SatelliteGuys app!
 
You must log in or register to reply here.

Similar threads

S
New Issues with Joey 4.0s
Replies
1
Views
516
Almighty1
E
Replace Joey with another H3
Replies
4
Views
1K
ekilgus
E
H
Replace a vip722k HD
Replies
9
Views
1K
navychop
B
Joey 4?
Replies
30
Views
4K
sklunk
S
Z
Hopper 3 setup with Joey Plus issue
Replies
25
Views
3K
Almighty1
Menu
Log in
Register