Still issues after 517 update, awaiting a fix. I'm close to dumping dish over this. OTA was only hope for watching decent PQ with Dish, now that is gone too.
Sent from my Pixel using Tapatalk
Sent from my Pixel using Tapatalk
I don't see it as a tuner issue. Tuner works fine, signal passed through to the joeys is hosed up.The single tuner is discontinued and I doubt supported any more by DISH. If you want to use an ota tuner you need to get the dual tuner dongle.
The single tuner is discontinued and I doubt supported any more by DISH. If you want to use an ota tuner you need to get the dual tuner dongle.
Ok to all that, but I don't think the single tuner is sold or available to anyone for quite some time. So that was what I meant about it being discontinued and not supported any more. If DISH still sold them I would agree with you that it is still supported.The single tuner is still supported. If you can find one it is a much better choice.
1) It is more sensitive for weaker signals. In my case I receive 14 more channels with the single tuner compared to the dual tuner.
2) It does not run hot. The new dual tuners generate a lot of heat.
3) Because it runs cool it does not fail prematurely. Several have reported that the dual tuner quit working in less than one month. It probably failed due to the heat.
Sent from my iPhone using SatelliteGuys mobile app
CRAP: Continuous, Random Audio-visual Pixelation... There, I fixed it.Since then, it's crap.
Hopper 3 with the single tuner dongle and two Joey's. Constant OTA signal breakups while watching live from the Joeys or any OTA recording. The only time I can watch pixelation free is when watching live from the Hopper.
Until it doesn't.After restart it should work well.
Until it doesn't.
The single tuner is still supported. If you can find one it is a much better choice.
1) It is more sensitive for weaker signals. In my case I receive 14 more channels with the single tuner compared to the dual tuner.
2) It does not run hot. The new dual tuners generate a lot of heat.
3) Because it runs cool it does not fail prematurely. Several have reported that the dual tuner quit working in less than one month. It probably failed due to the heat.
Sent from my iPhone using SatelliteGuys mobile app
Ok I am confused. Why would you do this?I followed the advice of crodrules who suggested I do my OTA scans on the single tuner adapter, then unplug the receiver and swap for the dual. Working flawlessly so far. Of course, this requires you to have both devices (old single and new dual dongles). However, this way, I won't have to worry about burning out the old single tuner.
Ok I am confused. Why would you do this?
So you do a channel scan with the single because it picks up more channels I assume
Do you have more breakups using the new ota tuner?