What LNB for c120 feed to use

[Pixl]

I picked up a 1.5 m offset dish. I want to replace the original tx/rx electronics with a decent c120 mount lnb using the original feed. What works good and is still available?

Jim

 

[pedrogarcia]

An Invacom would be my choice KU, C or both

 

[brotherhood]

thats what i use with my 4ft channel master,and works great

 

[ACRadio]

I use the old Hughes C120 flange LNB's....they used to be still available on eBay. I think I still have an Invacom SNF-031 that I could part with...and I could probably dig up a Hughes as well...

 

[Anole]

The LNBs off a DishNetwork SuperDish (obsolete by now) has the c120 flange.
Here's one thread discussing them.
The LNBs were also available from global-cm.net at one time.

edit:
Oh, after much searching, here's another old thread worth a look.
This link takes you right to some pictures of the Dish FSS bandstacked LNB.
The one to the right is courtesy Tron, who's posted quite a lot about 'em.
The middle picture is from Global-CM.

PLEASE LOG IN TO GET RID OF THESE ADS!

 

[Pixl]

Ok guys, quite a few choices and info. Thanks for the research I'll check it all out.

Jim